Estimated 1/4 mile time Question
What do you guys think i would run??
Here's my proposed setup: (i have an Auto trans)
-TRD CAI
-Megan S-Pipe
-Megan Mid-Pipe
-Injen Axle-Back
-ZPI Crank Pulley
i know its not much but im just curious.
any other suggestions to make it quicker w/o going f/i or spending enormous amounts of cash on motor work.
Thanks guys
Here's my proposed setup: (i have an Auto trans)
-TRD CAI
-Megan S-Pipe
-Megan Mid-Pipe
-Injen Axle-Back
-ZPI Crank Pulley
i know its not much but im just curious.
any other suggestions to make it quicker w/o going f/i or spending enormous amounts of cash on motor work.
Thanks guys
Originally Posted by svrTc06
What do you guys think i would run??
Here's my proposed setup: (i have an Auto trans)
-TRD CAI
-Megan S-Pipe
-Megan Mid-Pipe
-Injen Axle-Back
-ZPI Crank Pulley
i know its not much but im just curious.
any other suggestions to make it quicker w/o going f/i or spending enormous amounts of cash on motor work.
Thanks guys
Here's my proposed setup: (i have an Auto trans)
-TRD CAI
-Megan S-Pipe
-Megan Mid-Pipe
-Injen Axle-Back
-ZPI Crank Pulley
i know its not much but im just curious.
any other suggestions to make it quicker w/o going f/i or spending enormous amounts of cash on motor work.
Thanks guys
Why no header? I'd say you'd do better with MMW header/spipe, custom mid pipe and axleback. And the intake for good measure. I don't know if the crank pulley would really give you that much of a gain in time though.
What about tires?
new tires was a given...even with the Auto trans the stock tire suck, lol
just curious, what would/does a manual run with these mods. i ask this b/c i know a stock manual should run ~15.7 give or take....and a stock Auto runs ~16.1/16.2 give or take.
i figure if i just compare times for a manual, it would give me an idea about an auto.
thanks for the help
just curious, what would/does a manual run with these mods. i ask this b/c i know a stock manual should run ~15.7 give or take....and a stock Auto runs ~16.1/16.2 give or take.
i figure if i just compare times for a manual, it would give me an idea about an auto.
thanks for the help
You could go through this thread and see if there's anything close:
https://www.scionlife.com/forums/viewtopic.php?t=26290
https://www.scionlife.com/forums/viewtopic.php?t=26290
I was at the drag strip this past friday night I saw 2 tCs runnning didnt know if they were autos but im pretty sure they were. They ran low 17s .I also raced my tC with /I/H/E and a 50 shot. I ran 15.4. So maybe if get a good reaction time you could get a high 16 sec run with a stock tC.
I/H/E = you can run a 15.3 with full interior and spare of course.
(I am a standard)
Stock tC's 04-06 Rated @ 15.7 (Some people manage 15.5 stock w/excellent driving)
I recently saw a 2008 tC run 15.4 stock...
Track temperature and alot of things factor in on 1/4 times also. But if your looking to shave off time Intake+Exhaust doesnt make a difference unless you complete it with a full system + Spipe and headers ^_^
My best time as N/A was 14.95 with:
Intake, headers, exhaust, pullies, S pipe, (NT01 Tires) + Suspension
Also, one of the guys in my club somehow ran a 15.8 with his auto (only exhaust + intake lol?)
If you have I/H/E and a 50 shot you should be seeing mid 14's atleast.
(I am a standard)
Stock tC's 04-06 Rated @ 15.7 (Some people manage 15.5 stock w/excellent driving)
I recently saw a 2008 tC run 15.4 stock...
Track temperature and alot of things factor in on 1/4 times also. But if your looking to shave off time Intake+Exhaust doesnt make a difference unless you complete it with a full system + Spipe and headers ^_^
My best time as N/A was 14.95 with:
Intake, headers, exhaust, pullies, S pipe, (NT01 Tires) + Suspension
Also, one of the guys in my club somehow ran a 15.8 with his auto (only exhaust + intake lol?)
If you have I/H/E and a 50 shot you should be seeing mid 14's atleast.
Thread
Thread Starter
Forum
Replies
Last Post
Besk_one
Scion xA/xB 1st-Gen Wheel & Tire
8
Oct 18, 2003 08:41 PM








