Monster Motorworks CEL Light Fix for Headers. ( Pictures )
#22
Re: Monster Motorworks CEL Light Fix for Headers. ( Pictures
Originally Posted by dieselstation
any time estimate as to when this is available?
Originally Posted by monstermotorworks
We will be selling these O2 Adapters very soon.
We would like to test it for a few more weeks to make sure we have no CEL LIGHTS.
We would like to test it for a few more weeks to make sure we have no CEL LIGHTS.
#25
Doesn't actually slow the flow down. Just slows the flow that the sensor is seeing. Basically it takes the sensor out of the main flow. It may affect flow in a minute amount, because it will probably cause some sort of turbulence in the exhaust flow....but not enough to notice a difference.
#26
The second 02 does nothing but assure the ECU that the cat is still there, and working efficiently. It does so by measuring the oxygen content of the exhaust flow. By limiting (but not eliminating) the amount of hydrocarbons it sees, we bring the 02's voltage closer to what it would be if the cat was still present. Voltages without the cat or a CEL fix are lower than stock, low enough to be outside of the ECU's preset acceptable range. If you understand how an 02 sensor works, you will know that the oxygen acts as a conductor for the electrical current running through the sensor. The more oxygen, the higher the voltage reading. Our goal is to pull the sensor out from the direct flow of hydrocarbons, so the sensor reads a higher oxygen to hydrocarbon ratio.
Thread
Thread Starter
Forum
Replies
Last Post
xBSciontist
Scion xB 1st-Gen Aero & Exterior
6
06-18-2019 03:06 PM
SkillFreeJake
Scion tC 2G Aero & Exterior
17
07-27-2015 12:34 AM
TheTripleC
PPC: Vehicles
1
01-04-2015 06:46 PM