back from korea build
#1
Senior Member
SL Member
Thread Starter
iTrader: (-1)
Join Date: Feb 2006
Location: Poolesville, MD
Posts: 439
back from korea build
alrighty fellas ive been in korea for 7 months and im on leave for twenty days... i came home to my car needed a new ps pump, turbo,manifold and other stuff..
setup:
GSP 60-1 .63 turbine
treadstone intercooler kit (modified)
custom downpipe(not shown in pic)
aem fic
dwerks 550cc
255 walbaro
full 2.5 exhaust
stock long block
LOTS OF VHT CERAMIC PAINT
okay, the car made 299 hp and 301 tq on a to4e at 11 psi the last time i took it for a tune. AFTER installing the new turbo and downpipe i decided to do some fuel adjustments and datalog the run, entered the info into my VDR software which is quite accurate and made 347 whp and 362 wtq on a dyno jet setting with smoothing factor of 12. i had to let off at 5500 rpms due to lack of fuel up top i should be tuning it as soon as i get a day with no rain
setup:
GSP 60-1 .63 turbine
treadstone intercooler kit (modified)
custom downpipe(not shown in pic)
aem fic
dwerks 550cc
255 walbaro
full 2.5 exhaust
stock long block
LOTS OF VHT CERAMIC PAINT
okay, the car made 299 hp and 301 tq on a to4e at 11 psi the last time i took it for a tune. AFTER installing the new turbo and downpipe i decided to do some fuel adjustments and datalog the run, entered the info into my VDR software which is quite accurate and made 347 whp and 362 wtq on a dyno jet setting with smoothing factor of 12. i had to let off at 5500 rpms due to lack of fuel up top i should be tuning it as soon as i get a day with no rain
Thread
Thread Starter
Forum
Replies
Last Post