dyno pic 14 psi
This was on my kit at 14 psi, stock motor, as you can see the power band decreases at the end because of wastegate problems wich the boost was coming down to about 11 psi by redline, and also on a not so efficient turbo. The car has been in the works to try and make plenty more of power.
Read his thread.
https://www.scionlife.com/forums/vie....php?p=1267151
https://www.scionlife.com/forums/vie....php?p=1267151
Originally Posted by enriquetc
all the things that are not universal were custom made, the manifold was made out of regular piping then sent to a shop to make out of cast iron and there it is.
Originally Posted by enriquetc
The turbo was a .42 trim compressor and 40 exhaust side thats why it wasnt being too efficient.
By efficient, you mean the lag right? Cause it looks like there is a good deal of turbo lag.
well now i went with pistons, and stock rods, and arp studs, new turbo 60-1 front and well see how much we can make off the stock rods. still breakign in the motor as soon as we ge tthe car dynotuned i will post pics of new charts.
Originally Posted by enriquetc
it lasted about 4 months but prob wouldve lasted longer, but the car got an o2 sensor problem and leaned out a lil bit and fried the rings.
Thats actually the same psi I ran on my car with the stock internals, but made quite a bit more HP, about the same torque. Stock ringlands dont like that much boost.






