FIC CPS problems, seeking help

Reply Subscribe

Thread Tools

Search this Thread

Nov 11, 2009 | 12:40 PM

#41

rangerryda

Senior Member

SL Member

iTrader: (1)

Joined: May 2009

Posts: 2,251

From: Melbourne, FL

Max MAF voltage should be around 4.25v on the stock setup so that may help when you are clamping later on after you figure out all the bumps in the road.

Nov 11, 2009 | 01:31 PM

#42

ElevationTC

Senior Member

SL Member

Joined: Apr 2008

Posts: 4,156

From: Orlando, FL

Quote:

Originally Posted by rangerryda

Max MAF voltage should be around 4.25v on the stock setup so that may help when you are clamping later on after you figure out all the bumps in the road.

Im clamping now per a very knolegeable source at 4.30

works great

Nov 11, 2009 | 03:14 PM

#43

rangerryda

Senior Member

SL Member

iTrader: (1)

Joined: May 2009

Posts: 2,251

From: Melbourne, FL

I got mine off a datalog from a bone stock 07+ TC. Other years may vary slightly due to the design difference but not by much. This was done with an F/IC so other EM types may vary slightly also.