K guys here's my situation. i have myoil feed line and the fitting into the turbo, but cant find the right part to tap it into the sensor coming out of the block. I know i need a 1/8"NPT fitting for the other end of the oil feed line, but i cant match up/find the right fittings.

I've been to 2 home depot's, first time got a regular Watts 3 way 1/8 brass T fitting but the oil feed wouldnt screw in it. What kinda store can i find a 1/8 NPT fitting for this? in the compressor and air gun section they did have a 3 way NPT T splitter, but it was 1/4" with all 1/4" studs and everything needed, just not in 1/8". and the one i got isn't NPT and doesn't screw in right.

I know there's places online but are there any other stores besides Home Depot or Ace that would carry this? and a list of exactly what fittings i need would be greatly appreciated. Can't really find a close up of a pic of the pieces either, searched and found a couple threads but nothin really enough in detail to help me out.

 

oreillys....autozone...advanced. i bought all my fittings from oreillys since i worked there.

 

ill have to check out advanced and autozone today, didnt think they would carry it but ill check em out

 

if I remember correctly from the dezod directions, I wanna say it's a 1/8 bspt fitting

 

yup, on page 9.

http://www.dezod.com/files/DZMTCMAN%20V1.75.pdf

 

We have the fittings of you need. They don't cost much. I can ship them right out if needed.

 

PM'ing you sir

 

You have a reply

 

Ace should have more as far as fittings if you have one in your area.

 

here ya go...
https://www.scionlife.com/forums/sho...d.php?t=184926

 

yeah read through that but couldnt find any 1/8th npt's. they only had 1/4" T fittings and 1/4" regular fittings. dezod don said he'll take care of me though by sending me the fittings i need...for cheap too!

 

I have a used one a little scrathced up that I dont need - Works perfect - $7 Shipped let me know