how come you havn't called dezod? they would help you type quick.

 

i called them multiple times on monday while i was at the shop and left a message, but i'm guessing they were closed because nobody picked up or returned my call.

 

def man! i'd help you out in any way possible! i hope you get a kit soon, because i'm tired of not having any tC enthusiasts around my area lol

 

THere are quite a few of TT users in FL....you guys would be suprised...just cause there not on here doesn't mean they don't exist....but don't forget about Brett

Matt-

Sorry about last night..if you are on here call me asap and I will get you the settings

Regards-

Todd

 

hey Todd, any TT users anywhere near jacksonville?!?!

 

any updates on the car new videos possibly?

 

still having this emanage problem... todd and i are going over the harness tomorrow to make sure it's wired correctly... if it is, then the problem is the emanage unit itself. the jumpers/rotary settings are perfect. i'll know by tomorrow... this is all that's keeping my car in the shop

 

AEM F/IC FTMFW!
Sorry bro...had to do it! You'll get it, don't worry, and when you do...WEEEEEEEEEEE!!!!!!!!!

 

yeah, thats weird that my harness was good and yours isnt though?!?! mines a 08 though and i know it changed. you'll get er done!

 

Emanage FTL. This is the exact same thing that was happening with my emanage. I sent it in to Greddy and they said it was fine. Good luck bro. I'd plan on getting the F/IC if I were you.

 

okay... i *might* have isolated my start-up problem... i was looking at the 07 tC ECU pinout and comparing it with my dezod PnP harness to make sure that all of the wires were in the correct places... upon looking at my ignition coil ECU terminals, i found what i think is an irregularity in the harness.

ok, according to the ECU pinout on dezod's tech notes section of their website, the E8-14 through E8-17 terminals are for the ignition coils, as noted by this excerpt:



so, looking at that, this is what i came to conclude:
E8-17 (IGT1) is channel 1. now, according to my emanage manual's wiring diagram, channel 1 should be a blue wire. on my harness, this matches up. no problem. next.
E8-16 (IGT2) is channel 2. this should be a an orange wire. it's not, it's a purple wire. as i'll show in a second, i think the purple wire is for channel 4, not 2. next.
E8-15 (IGT3) is channel 3. this should be a yellow wire. again, it's not. it's an orange wire (that should be in channel 2). last one...
E8-14 (IGT4) is channel 4. this should be the purple wire, but it's not. it's the yellow wire.

here's a picture of what i'm talking about: you can see that the blue is in the correct location, but the others are not. according to my theory, it should be, in order: blue, orange, yellow, purple.

again...


if anyone knows off the top of their head that my harness is wired incorrectly (as i'm theorizing), can they please post and confirm? if not, can someone check on their harness and see if theirs is the same or different than mine? hopefully this is the problem. i'd rather have this be the issue and fix it then keep trying to figure out what's actually keeping my car from starting. i want my car back!!

P.S.- these wires have black stripes, which, according the to the emanage manual, denotes that they are the channel signal OUTs. can anybody confirm that they are on the correct side of the harness? the wires with white stripes are the channel signal INs, and they are on the more free-moving side of the harness (with the four plastic clips instead of the one, big clip like the one in the pics).

 

i have an 08 but i can check to see if they are in that order anyway when i get off work. hope you fix it soon!

 

thanks man, i hope so too.. i'll also take a pic of my emanage circuit board and PM it to you.. just on the off chance something's still off.

 

sounds good bro. i get off here in about 2 hours or so.

 

awesome.. you have PM sir!

 

you have a reply! haha

 

bump for an answer about the harness

 

haha im still at work.. im off in about 10 though! pretty soon!

 

lol i was talking to all the other slackers that are too lazy to go and look at their 2007 harnesses but brandon you know i'd be eternally grateful if you checked yours once you get off work! haha it's funny that you're still at work... it's 12:05 in florida

 

did you end up with the AEM unit?