* tC : HVAC / Climate Control LED Conversion Guide
Member
SL Member
Joined: Jul 2008
Posts: 58
From: Durham, NH
Hi! i just received my kit to do this today and I ordered the reversed LCD screen. is the film to do this for the hvac supposed to be as small as the one for the gauge cluster? I only ask because the film i received only covers half of the LCD screen for the HVAC
Thread Starter
Former Sponsor
SL Member
Joined: Apr 2006
Posts: 2,093
From: Anaheim, CA & Las Vegas
It's either I've included the wrong film or you might've added film for the gauge cluster odometer LCD...
Thanks..
Member
SL Member
Joined: Jul 2008
Posts: 58
From: Durham, NH
Senior Member
SL Member
Joined: May 2009
Posts: 148
From: In a van...down by the river
Yes, you don't need the resistors BUT they will make white/blue/green LEDs much brighter. I did the white led swap w/o resistors and I'll be swapping in the resistors soon to brighten it up.
Thread Starter
Former Sponsor
SL Member
Joined: Apr 2006
Posts: 2,093
From: Anaheim, CA & Las Vegas
Sorry about no problem, seems like Scionlife doesn't send me e-mail notification much lately..... I didn't get to see it till today...
Resistor/Voltage Regulator is not required for red LED conversion
But if you are doing blue, white and green LED they are required (if you don't use them then it will be very dim)
Resistor/Voltage Regulator is not required for red LED conversion
But if you are doing blue, white and green LED they are required (if you don't use them then it will be very dim)
