look's cool so far keep it going

 

dealer just called. SC is being installed tomorrow and Thursday.

 

Go go gadget wood scraps.

 

are u just using resin to hold that board up?

and how are u hiding the supports for the floating amp racks?

j/w, i wanna get a good visual of this sucker

 

There's glass in the corners...it's so drenched that you can't see it that well, about 2" on the boards and on the sides

Once it's set, I can pull out that bar and remove the rear seats, then glass everything together.

Supports will be under tha amp, attached to the ground

 

so the supports will go through the fiberglass sub enclosure and to the bottom of the trunk? how are u gonna cover the rods?

i figured the board was there just to hold it in place till the resin hardens.... waiting for it to harden is a pain in the butt... slows the process down lol. i couldnt stand it when we made my box... go so close to finishing... then wait... the resins gotta dry... oh now its time to bondo... oh wait... the bondo needs to dry lol

 

Not coming out.

 

The bondo drying isnt as bad if you mix it hot as s#1t But then ya gotta be fast. heh heh

Looks like you got a lot of resin and glass work on your hands there, but it would be a fun project. Just so you know, I am one day going to install 33 in mine just to ____ you off :D JK, good work.

 

In about 30 minutes, it's permanent

And yeah...I'm all about mixing hot and working fast, except the glass, mix a little short and throw down 15 layers at once

 

^^ yeah, glass resin can get mean when it is mixed too hot. :D

 

and how are you going to wire them up, mister smarty pants?!?! hehe JP

 

Three amps pushing 11 speakers each?

 

That's about 5 layers of glass

 

Lookin good!

 

A few..."miscalculations."

The trim pieces that hold the cargo cover in don't slip in w/ the MDF going that close to the edge, so I need to trim some.

No biggie really, like 2 minutes w/ a jig saw then glass her up

 

thats the beauty of mdf A sander and a jigsaw and anythign is possible

 

So your gonna leave the back (mdf board) all squared up like that?

 

The corners are going to be rounded off, and then the top will be rounded when the dish is attached, but yeah, it's going to sit up against the rear seats...it's EXACTLY the angle of the seat

 

Hey chris what are you doing with the rear seats?

 

I find it funny people don’t understand how sound works. You will be sooooooo loud when this is done!!! I saw some people saying that the speakers are too small to be that loud but what they don understand is that you will move the same amount of air as like 3 18"s I cant wait to see it finished I really cant wait to hear it.