I want to remove the spare tire and mount a sub box down there for a 10" alpine type-x. I want the sub to fit flush with the floor basically. Does anyone have a blueprint of a box (.5-1 cu. ft sealed if im allowed to be picky ) that will fit down there or am I gonna have to try and fab one up myself?

 

well i hope you have optional carpets back there because that would be your best bet as an outline and just make a square measurement.

somebody did it already here. somewhere in the post. if not you could always order it from quarter wave design.

 

I'm planning to do this in a few weeks.
I found some ppl that can do this for me, but let me know when you get yours done.

 

how deep is the type-x alpine?? seems like it would raise the floor quite a bit..

 

8.6" is the top mount mounting depth for the type-x.

 

well then your going to have a problembecause the height from the floor to the bottom of the pit is 7". So its gonna have to be built up some. Did you see the box that i made? the link is in my sig

 

hmmm that looks really nice... if I were to use that, i would need to come up with another place to put the amps. I was going to mount them to the sides of the hatch. I carry around big bins filled with detailing supplies. i put down the seats and lay them in the back. either a floor mount or your side mounted box would be awesome. my problem.. i was going to do the floor mount and then bolt the amps to the sides, now that one of the sides is taken up, where can i put the amps and not have them interfere with the main hatch area where i put my supplies?

 

in the floor! haha Look in my profile, i have pics of my amps in the floor

 

I did a jl w3 vs in mine... think I made the box with the wood thickness 10" tall and then just built a false floor to replace the whole top... then I cut the edges and added hinges so I can still use my cubby holders on the sides... not sure if it was 10 but its the same height from the top of the holder down to the middle of the tire well... One thing you might wanna think of... fiberglass bottom with a box on the side and top would give you just a bit of extra room.