Is getting in the way of a flush shut. Anyone have any ideas on how I can get it to flush shut? I dont really want to take the door off, because I like the idea of having my expensive HU hidden. Also, there is a small gap around each side of the HU. What can I do to plug this gap to make the install look more clean and mean?

 

Yes, I am in the process of making a write up, you will need to drill holes in the mounting bracket to get it to sit back a little further, and for the small gap you just need to get a mounting kit for the tC, and that will fix that.

 

if you search there is a forum on this

 

use the search button to find more detailed answers, but basically you need to drill new holes 1/4" further back to clear the door.

 

yeah there is one, but its for single din, I modified the method for me to be able to mount another set of screws, to make it more secure.

 

Link to where I can order the specific one I need?

 

you can goto circuit city, or best buy, or even crutchfield

http://www.crutchfield.com/S-a5Eox5i...p?i=003TOYK969

in any case you will have to modify it with a dremel, unless someone else knows of one that you dont have to modify for double-din

 

so we will have to cut off that bottom cubby hole piece with a dremel...right?

 

yeah, all you really need is the bezel, but there is still the issue of modifying the radio mounting brackets.

 

So is there a DIY writeup on putting the unit back a 1/4"? I dont want to mess anything up.

 

yup, there's a thread with pictures. sorry, don't have a link for it.

 

Here's a link for you acelesson


https://www.scionlife.com/forums/viewtopic.php?t=27719