interior lighting help?
hey im new to the whole interior lighting and have a few questions
first do i just run a power cable to the battery like i would for an amp and just leach all the lights to that?
and do i need to ground it?
-thanks
first do i just run a power cable to the battery like i would for an amp and just leach all the lights to that?
and do i need to ground it?
-thanks
Of course you need to ground it. Any circuit that you want to run properly needs to be grounded. It is also a safety issue.
Yes, you could run a lead right from the battery, just make sure you run an inline fuse so there arent any voltage spikes that reach the LEDs that could potentially blow them up.
Good Luck
Yes, you could run a lead right from the battery, just make sure you run an inline fuse so there arent any voltage spikes that reach the LEDs that could potentially blow them up.
Good Luck
Senior Member





SoCal tC Club
SL Member
Team N.V.S.
Scinergy
Scion Evolution
Joined: Oct 2004
Posts: 15,699
well... grounding completes the circuit...
open circuit = no worky worky...
but yeah... tapping into your fuse box inside the car is another possibility. you can get one of those "add-a-circuit" fuseholder kit things.
open circuit = no worky worky...
but yeah... tapping into your fuse box inside the car is another possibility. you can get one of those "add-a-circuit" fuseholder kit things.
Yea your on it...
https://www.scionlife.com/tech/?article=68
come on mod.. point em to the tech section
https://www.scionlife.com/tech/?article=68
come on mod.. point em to the tech section
Thread
Thread Starter
Forum
Replies
Last Post
clickclickw00t
PPC: Interior / Electronics
2
Feb 18, 2015 08:57 PM
sithscripter
Scion xA/xB 1st-Gen ICE & Interior
9
Sep 26, 2003 05:27 AM



