sorry got another q. guys. alright i got some more neon and instead of runnin another wire to the battery i ran the to the wire to the battery with the other neons but made sure they dont touch. now i have 2 switches with neons off the one wire but the wire to the batterys thicker also. is this alright to have done?

 

i'm a bit confused.
if your Q is if its ok to tap into a another line for power, the answer is yes
i dont understand how you ran it to the "wire to the battery" (i assume thats the first neon kit's wire) without touching

 

yea basically let me reframe 4 you. alright for the neons the wire to the battery goes to the positive and one to negative and then i put them through the firewall. then the neons have 2 wires and i attached one to each. now with the new neons instead of putting 2 more wires to the battery, i just hookend the new ones to the same wire to the battery at the ends like a 1/4 inch away from the other neons connected and electrical taped them so they wouldnt thouch. is this ok.

 

thats fine. its ok if the old neon wires touch the new ones