More air intake idea
#1
More air intake idea
I'm new to all of this and I would like some opinions on my Idea.
I'm looking at having the front of my air intake system to be in the front of the car. I'm thinking about making a custom fiber glass grill with a 3 inch hole to do this.
Would this create to much air flow and cause problems?
Kenny
I'm looking at having the front of my air intake system to be in the front of the car. I'm thinking about making a custom fiber glass grill with a 3 inch hole to do this.
Would this create to much air flow and cause problems?
Kenny
#2
Which car do you have? On my xA, there was a black panel preventing air flow from the grill to the area of engine bay where my Injen RD2105's filter was. I took it out...seems good enough for me :D
#4
And now, a warning...
I, NOR SCION LIFE CAN BE HELD RESPONSIBLE FOR YOUR ACTIONS.
If you pop off the 4 fasteners on the front grill, you'll see these two black panels...one on each side of the radiator. I'm guessing they used them to direct the air from the lower grills through the radiator. I took off the one on the right side of the radiator. There are two pegs on the black panel that are attached to the support. Just take some pliars, pinch the pegs, and push them out. The peg on the bottom is harder to get to. Just watch out for the air bag sensor.
I, NOR SCION LIFE CAN BE HELD RESPONSIBLE FOR YOUR ACTIONS.
If you pop off the 4 fasteners on the front grill, you'll see these two black panels...one on each side of the radiator. I'm guessing they used them to direct the air from the lower grills through the radiator. I took off the one on the right side of the radiator. There are two pegs on the black panel that are attached to the support. Just take some pliars, pinch the pegs, and push them out. The peg on the bottom is harder to get to. Just watch out for the air bag sensor.
#7
Banned
SL Member
Team N.V.S.
Scinergy
Scion Evolution
Scinergy
Scion Evolution
Join Date: Jul 2003
Location: 886motorwerx
Posts: 4,770
I made a prototype fibreglass duct that replaces the foglight cover on the xB. It had a screen on the inside portion of it also. The ducting directed the airflow directly to the filter on my short ram. The prototype is sitting in San Martin and I have put in on the back burner for now as I have JDM foglights in place.
#8
Originally Posted by mikochu
Which car do you have? On my xA, there was a black panel preventing air flow from the grill to the area of engine bay where my Injen RD2105's filter was. I took it out...seems good enough for me :D
#9
Senior Member
SL Member
Team N.V.S.
Originally Posted by squirrel
I made a prototype fibreglass duct that replaces the foglight cover on the xB. It had a screen on the inside portion of it also. The ducting directed the airflow directly to the filter on my short ram. The prototype is sitting in San Martin and I have put in on the back burner for now as I have JDM foglights in place.
Thread
Thread Starter
Forum
Replies
Last Post
hampton1100
Scion tC 2G Drivetrain & Power
6
05-28-2015 07:32 AM