The tC Fantastic Project: Work in Progress
Senior Member
SL Member
Joined: Nov 2004
Posts: 2,496
From: Connecticut | Massachusetts
Originally Posted by TheFantasticG
I haven't driven with the Speedways yet, but the Prototipo is great in the "feeeeeeeel" respect. I highly doubt the Speedway will any less impressive in that regard.
Thread Starter
Senior Member
SL Member
Joined: May 2008
Posts: 926
From: Tomball, Texas
The tC goes back to the shop today
They'll have it for four to five weeks. Depending how long I decide to stay in the desert.
Its getting a whole slew of new parts and whatnot.
1) TRD Springs (4)
2) TRD Struts (4)
3) HKS Special Edition Turbo Timer
4) ARP Wheel Studs (4 sets of 5)
5) RBF DOT 4 Racing Brake Fluid (2 bottles)
6) Open ended Lug Nuts (4 sets of 5)
7) PowerSlot Rotors (Front & Rear sets)
Ingalls SS brake lines (Front & Rear sets)
9) TechnaFit SS Clutch line
10) Dezod Endlinks (Front & Rear sets)
11) Front Hotckis Anti-Sway bar
12) Axxis Ultimate Brake pads (Front & Rear sets)
13) Energy Suspension Master Bushing Kit
14) Energy Suspension Motor/Trans Bushing Kit
15) Gates Low-Temp Thermostat
16) Competition Clutch Stage 2
17) Competition Clutch 12 lb. Flywheel
They are also ceramic coating the exhaust manifold and exhaust housing of the turbo. Going to see about getting the DP wrapped or coated as well. There's a little bit of tweaking left to do either on the BOV or the AEM I/FC... has alittle bucking problem at 3.8k-4k RPMs if you are at full boost by then (which means peddle to the floor).
Woooooooo!!!
They'll have it for four to five weeks. Depending how long I decide to stay in the desert.
Its getting a whole slew of new parts and whatnot.
1) TRD Springs (4)
2) TRD Struts (4)
3) HKS Special Edition Turbo Timer
4) ARP Wheel Studs (4 sets of 5)
5) RBF DOT 4 Racing Brake Fluid (2 bottles)
6) Open ended Lug Nuts (4 sets of 5)
7) PowerSlot Rotors (Front & Rear sets)
Ingalls SS brake lines (Front & Rear sets)9) TechnaFit SS Clutch line
10) Dezod Endlinks (Front & Rear sets)
11) Front Hotckis Anti-Sway bar
12) Axxis Ultimate Brake pads (Front & Rear sets)
13) Energy Suspension Master Bushing Kit
14) Energy Suspension Motor/Trans Bushing Kit
15) Gates Low-Temp Thermostat
16) Competition Clutch Stage 2
17) Competition Clutch 12 lb. Flywheel
They are also ceramic coating the exhaust manifold and exhaust housing of the turbo. Going to see about getting the DP wrapped or coated as well. There's a little bit of tweaking left to do either on the BOV or the AEM I/FC... has alittle bucking problem at 3.8k-4k RPMs if you are at full boost by then (which means peddle to the floor).
Woooooooo!!!