Whats a good way of measuring the Tc's ride height? When I had my Integra all I did was measure from the frame to the floor, that was the best way to do it on that car. However, on the Tc the frame bars that run from the front to the rear are not flat, towards the middle they distort so its impossible to get a good rear height reading.

I've never liked measuring from the middle to the fenders because I've always thought the fenders wells differed from the front to the rear, giving you uneven results.

Any ideas?

 

Any track tech will measure the lowest point on the vehicle, whatever that may be. Front subframe or segment of exhaust piping just in front of the rear axle line are the most likely.