Hey, Im looking at getting some 18x7.5 35mm offset enkei RS7's wrapped in 225/40/18 series azeni's. what would be my best bet for springs to lower the car on these rims. I don't mind a little rubbing at full turn, but if it's going to rub everytime i turn the wheel, that's not so good.

 

S-techs, H-techs, TRDs, Eibachs .. The list goes on ..

 

225/40/18 are the same dimensions as stock tires. Not saying they are the same numbers, saying they are the same overall height. So if the springs wont rub on stock 215/45/17's they wont rub on 225/40/18's. Im running TRD springs with no rub ever on 225/40/18

Or so I think

 

well, that's good to know. If it's the same overall height, I'm getting s-tech's. thank ya

 

no problem