squirrel spotters
12-21-2012, 07:21 AM
#1
Junior Member
Thread Starter
Join Date: Jun 2012
Posts: 12
squirrel spotters
Just put some 35w 6000k HIDs into my 2012 TC and was wondering if I needed to adjust the squirrel spotters?
Do you guys adjust them or just leave it as is? Leaving it as is, does it blind other drivers or is it just fine?
Also, if I do have to bend the squirrel spotters, any link to "how to" you guys have?
Do you guys adjust them or just leave it as is? Leaving it as is, does it blind other drivers or is it just fine?
Also, if I do have to bend the squirrel spotters, any link to "how to" you guys have?
12-21-2012, 08:13 PM
#3
At least partially closing the holes for the squirrel spotters will help oncoming drivers. They're just metal tabs that you push/pull closed with the end of a clothes hanger or something that will fit.
The 1G had projectors too, 08-10. If there's a how-to, the method should be universal.
The 1G had projectors too, 08-10. If there's a how-to, the method should be universal.
Last edited by Jon; 12-21-2012 at 08:33 PM.
01-25-2013, 01:56 AM
#4
At least partially closing the holes for the squirrel spotters will help oncoming drivers. They're just metal tabs that you push/pull closed with the end of a clothes hanger or something that will fit.
The 1G had projectors too, 08-10. If there's a how-to, the method should be universal.
The 1G had projectors too, 08-10. If there's a how-to, the method should be universal.
01-25-2013, 02:10 AM
#5
The line isn't that crisp to begin with, being that they're halogen projectors. Pushing the tabs down just makes it more obvious. Getting the line sharp is a focus issue that requires modifying the distance between the bulb and lens. Not to mention the stock lens is probably not clear like you'd find on OEM HID projectors.
Thread
Thread Starter
Forum
Replies
Last Post
DigitalPro
PPC: Exterior / Styling
41
07-05-2012 06:38 PM
screwTC
Scion tC 1G Aero & Exterior
29
03-22-2008 02:46 PM
