I am thinking about using VHT to smoke my tail lights and I just wanted to see what is everyones opinions and experiences with the product.

Any info would be great!

 

When the can says use light coats... heed its warning and actually do light coats...

 

clear,wet sand and buff...unless you want it to look dull

 

Works great, i have used it on all my vehicles, but like they said above use light coats to get the darkness you want, plus it runs really easy Make sure you use a clear afterwords or it can dull and will eventually fade.

 

yeah like everyone says you got to be very careful with this stuff because it doesnt have the same thickness as paint so it will run very easily and just do light coats and let it dry till the darkness is where you want it then clear and wet sand and i think some people repeat the clear and sand part 3-5 times and then a good buff on it so its nice and shinny

 

what buffing agent should be used?

 

i use night shade also,like others mentioned,use very light thin coats,and let it dry properly prior on adding more coats,just be careful with it,if its done correctly ill look very nice

 

Vht FTW!!!!

I never use clear coats. I just buff with a rubbing compound and wax

 

I vote Laminex

http://www.lamin-x.com/Scion-tC-11-T...rs-p/sc205.htm

 

I vote that after two failed attempts at trying to get film to adhere to those wicked curves, that I grab two cans... A beer and VHT Nigthshades... Not in that order though. Nightshades, then then beer.

 

Touche

 

Here goes my spray job. Done with the VHT stuff.

 

Nice job!