Notices
Scion tC 2G ICE & Interior In-car entertainment and electronics...

DRL Relay wires

Thread Tools
 
Search this Thread
 
Old Aug 18, 2011 | 10:15 PM
  #1  
vaxc3's Avatar
Thread Starter
Senior Member
SL Member
 
Joined: Aug 2011
Posts: 144
From: Irvine, CA
Default DRL Relay wires

hey all!

New 2011 Scion tC owner here.

Want to add DRL lights to my car. Does anyone know anywhere that sells a relay wire system that turns off the DRL when the headlights come on?

I've searched eBay and was only able to find DRL relays where the lights will be constantly on when the car is on.

Any help is appreciated!
Old Aug 19, 2011 | 06:16 PM
  #2  
burtont62's Avatar
Junior Member
 
Joined: Jun 2011
Posts: 5
From: Flagstaff AZ
Default

You can do this yourself with a standard relay.

12v+ ignition to pin 30
12v+ headlight switch on to pin 86
12v- to pin 85
DRL wire to pin 87a
Headlights wire to pin 87

With this the DRL will come on with the key, but will turn off with the headlight switch turned on, headlights will come on, both will turn off with the key.

Check polarity on the wires to make sure it's a +12v, some newer cars are going to switching grounds.
Old Aug 23, 2011 | 01:11 AM
  #3  
vaxc3's Avatar
Thread Starter
Senior Member
SL Member
 
Joined: Aug 2011
Posts: 144
From: Irvine, CA
Default

Thanks burtont62! Your help is greatly appreciated!

I'm having a bit of a problem understanding the wiring. I see the #s on the relay. I'm just not too sure how the wires go.

when you mean 86 and 87... 86 goes to switch, 87 goes to headlight. I can't splice that together, it must pass through the relay, correct? (sorry, i'm a total n00b to this)

is there a way I can draw the power directly from the battery?
Old Aug 23, 2011 | 09:32 PM
  #4  
burtont62's Avatar
Junior Member
 
Joined: Jun 2011
Posts: 5
From: Flagstaff AZ
Default

when you mean 86 and 87... 86 goes to switch, 87 goes to headlight. I can't splice that together, it must pass through the relay, correct? (sorry, i'm a total n00b to this)

That is the same wire cut in half, so it must go through the relay.

is there a way I can draw the power directly from the battery?

If you get power directly from the battery then the DRL or headlights would always be on. Regardless of key on/off or even in the car. So no, you must use a 12v+ switched.
Old Aug 26, 2011 | 04:46 AM
  #5  
vaxc3's Avatar
Thread Starter
Senior Member
SL Member
 
Joined: Aug 2011
Posts: 144
From: Irvine, CA
Default

thanks for your help burtont62!

by chance do you know what would be a good ignition 12v to tap into?

Thanks!
Old Aug 26, 2011 | 04:50 PM
  #6  
burtont62's Avatar
Junior Member
 
Joined: Jun 2011
Posts: 5
From: Flagstaff AZ
Default

Test the larger wires coming down out of the steering column with a multimeter. Sorry I don't know the wiring colors for the scion, I haven't even worked on mine yet. You can also google "scion wiring diagram" and go from there. I'll look into it later today. Got to be at work in 20 min.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Oldtimer
Scion tC 1G ICE & Interior
2
Nov 6, 2019 10:11 AM
SkillFreeJake
Scion tC 2G Aero & Exterior
17
Jul 27, 2015 12:34 AM
GoodVibes
Scion xB 2nd-Gen Owners Lounge
3
Mar 10, 2015 04:29 AM
Green_rino
Scion FR-S ICE & Interior
1
Jan 20, 2015 01:41 AM




All times are GMT. The time now is 11:49 PM.