okay thanks sir...

 

I'll try to remember to take a picture today. RedlineGoods sent me the wrong color pieces when I was test fitting them, so I actually have the light gray, medium gray, charcoal and black I can put side-by-side. Funny thing is, even next to each other, I don't think many people would notice they aren't exactly the same.

 

You can use longer screws, just add washers. It is not the best way but I had to do it. I went to 4 different stores and could not find any 1/4.

 

^ Good point. Ultimately you just don't want to go through the front of the door panel.

 

okay... thanks...
ahaahahaha

 

Hey MP, any update on the interior carbon parts? Like how to get them?

 

You can contact Jim at info@roguese7ens.com. Just tell him you have a 2011+ Scion tC. He hasn't updated his website yet, but he'll take care of you.

Actually, this last Thursday, went down to his shop with Aaron and had some more measurements done along with dropping off some parts. He's going to do the remaining interior trim pieces (4 pieces across the dash) to match the steering wheel and doors.

Then, and I'm VERY excited about this, he's making splitters! Front, side and even rear! I wasn't sure about it until we had the board under the car, but it's gonna look great! And did I mention, as a splitter, it'll actually improve high-speed performance???

Once we get a hold of a spare rear hatch garnish, we'll start working on that too. Looks like that will also have to be a swap too. Guess that's the disadvantage of having a lego car.

 

Thanks for the screw help guys. Lol

 

Awesome news. Thanks for sharing the info and how to get the stuff done. As soon as i'm able to, i'll shoot him an email for what i need so if you see him, let him know. As far as the splitter goes, is that something that can be attached to another lip kit like my seibon kit?

 

It's kinda hard to tell from the pictures of your car with the lip kit. Front will be flat with a small area part way back that goes up to block the air (the front bumper is higher in the middle than the sides) from going between the bumper and splitter.

Sides are just flat pieces that run the length between wheel wells. And the rear is another flat piece that comes from the edge of the bumper to the cutout for the exhaust (even on both sides). You probably wouldn't need the rear as it's really just for looks.

 

so...white?

 

Wow! My build thread was all the way back on page 5 of the tC2 area! Shameful. It's been far too long since I've updated my build. Granted, I haven't actually upgraded my car, but that's another story.

Anyway, I have a question. I managed to mess up the passenger side, front wheel well plastic piece on my car. The piece had a big, long series of numbers, but I still can't seem to find the part. Help please?

Here's what the piece said:
53875-21100 7R 458W >PE-HD<

 

I'm on a retarded phone, but did you try here?

http://www.toyodiy.com/parts/q.html

Supposedly has OEM parts

 

I've tried a few places like that and I would think the items would be listed under the "body" section, but I sure can't find it listed.

 

any update from Rogue?

 

I should get the other interior pieces back today or tomorrow. The mold for the heat shield is done. Now just need to get the first piece made and make sure it fits!

 

OEM PART# for the passenger side fender liner: 53875-21100. You might need a couple of 90467-07214. Little push in clips that are on it. There are some other things in there too but hard to say what you will need. Let me know if you need other numbers I am a Toyota/scion Parts Tech

 

Thanks for getting back to me. I did a search with that number on TDR sparks and nothing came up. Not sure why... And I still have most, if not all, of the push clips and screws. I just tore out the lining.

Thanks again!

 

You know you can always contact me...I have the parts catalog in front of me 5 days a week!

 

Word on the street is you were looking for the LED in the mirror controls too. Did you ever figure out what size it is or how to disconnect / connect a new one?



That's the LED ^