Called the dealership and they can't find just the part I want for my car, they only see it packaged with an entire bundle, ie. Fog light kit, it comes with fogs, wires, and button to activate them on dash.

I just want a button for the dash, I'd rather it not have the fog symbol on it, i've seen a few different ones on this site, one for alarms, fogs, etc. I am going to be installing a back up camera, and I want to wire it to a push button beside my fogs so I can turn it on and off so everytime I reverse it wont kick on.

However, dealership can't find the little button part number in their system for me to order. ): I dont care what symbol is on it, I just want a button so I can wire it up to the stock location on dash lol.
2013 scion tc

 

Try this?

http://www.oznium.com/scion-switch-led

 

Oh wait, that's for 1st gen

 

Maybe this one? http://r.ebay.com/vWzOvQ
Might just be cheaper to buy a kit

 

You could just use a small rocker switch and mount it in the black slot next to the foglight switch. You can use a hole saw to make the initial hole and then a dremel to smooth the edges.

For wiring, you could wire the power of the camera to the switch. That way when the switch is flipped, the power to the camera is cut off.

Rocker switches are only a couple bucks on eBay or Oznium

 

Your going to find that Scion/Toyota is like that. I did the same thing for my tail lights, I tried to order just the pigtail and they said it was the whole tail light assembly! Good news is it wasnt that much, but still would have been a lot cheaper for just a socket. Just use the oem dummy ones, and drill holes in them, or measure the hole and find one that fits or is close to it, and either shave it down to fit or use some kind of filler to make it snug.

 

Freedom, I have a kit in my Dept I will check it out tomorrow I know for sure the part number is on the bag the switch comes in

 

8416012060

 

Thank you very much. Will call dealership today. Will post pics with new reverse cam when done

 

forgot to mention you might need 82824-21030 and 4 of 82998-12750 (connector and pins) so you can wire into it

 

I ordered the switch, thank you. 54 bucks, will be here next Monday then I plan on getting back up on Wednesday