on the xA's that I have done, I used the switch location near the drivers right knee. Are the newer xA's differnt?

 

heres the white installed in my car when it was still Thundercloud.

green:

hot lava:

blue:

 

EXACTLY what I want, if I order how fast can you get them to FL?

 

Not to rain on the parade, but since he asked for different sources, let me throw
www.onzium.com
out there. ANother great site for cheap lighting systems. I did my feet and vents with a music interface for less than $50. Randode of course is always the best, but there are other options too

 

The Toyota PDF instructions, which is maybe for what the dealers sell, show T-tap fittings spliced onto the cigarette power and ground wires. Then the lighting wires plug into the T-taps. Are T-taps like the 3M Scotch-Lok connectors - are these things that snap on a wire and cut through the insulation to connect another wire to it?

 

A quick search yields that it is in fact those snap splicer things best I can tell,.

 

I can ship asap. Priority mail takes about 2 days.


and its true, you can "roll your own" and wire up lights in your car. But I guarantee it wont be as clean as the kit that I sell.


Thanks everyone.

 

I believe they are. I have a 2006 xA and the switch panel has been moved to the driver's left knee. On the right side in the centre dash is the radio, then a gap, then the environmental controls, then the oven, then the ashtray+lighter, then a small change tray. I'll try and get a pic up soon, but it does appear that the layout has changed in the 2006 model.

 

if you can, send me the pic so I can change the kit.

 

yo randode, i just bought you're Hot Lava Cathodes! im expecting some goood things bro!

 

you will love them. thanks bro.

 

Randode I want to order a set of lights and the shifter, do you have any stock housings that I can do a deposit on I can't afford to not drive the car.

Let me know

 

I have shifters complete with housings, so All you have to do is swap it out. The shifter is $60, and I will nedd a $60 core charge that will be refunded after I recieve your stock shifter.

 

I've got it rough -- I live just down the street from Randode - he is the man - He has done all our installs. You cannot go wrong with his products. If you haven't done it yet email him now and get hooked up!

 

Randode sent you a PM, lets Get R doneee

 

You should e-mail him -- his pm box is always full
www.randode.com

 

Do you guys know if the shifter comes with metal bushings like the TRD one? haha maybe one of you fellow AZ guys know

 

the shifter uses the stock rubber bushings. Its all stock components, just modded. No slop.

 

in about 6 months... with minimal use

3 of my 4 lights went out

not cool in my book

 

Go with Randode!! I have over 50 led's installed by him and lots lots more