DIY: 2006 Matrix rear view mirror install(Using OEM bracket)
Thread Starter
Senior Member
SL Member
Joined: Jun 2007
Posts: 113
DIY: 2006 Matrix rear view mirror install(Using OEM bracket)
Matrix Mirror Swap Using OEM Mirror Bracket
Tools I used:
Dremel
Hacksaw
Vices (table vice and MY drill press vice)
Metal FilesSandpaper
Kyrlon Fusion (For plastic bracket cover)
2006 Matrix rear view mirror
(Wanted it for the read lights and anything is better than the one already in there!!)
Nut and Bolt
Mod Time: 1hour.
Hardness scale
1-easy, 10 Hella hard) 5
Sorry for the spelling mistakes...it was late when i posted this!!
I am having a fellow Scion Brother (CanXb) help me with the wiring of the lights. I will try and DIY that as well pending time.
Thanks for the view and as always if you have any questions hit me up at :
exo_kutioner@hotmail.com
Tools I used:
Dremel
Hacksaw
Vices (table vice and MY drill press vice)
Metal FilesSandpaper
Kyrlon Fusion (For plastic bracket cover)
2006 Matrix rear view mirror
(Wanted it for the read lights and anything is better than the one already in there!!)
Nut and Bolt
Mod Time: 1hour.
Hardness scale
1-easy, 10 Hella hard) 5Sorry for the spelling mistakes...it was late when i posted this!!
I am having a fellow Scion Brother (CanXb) help me with the wiring of the lights. I will try and DIY that as well pending time.
Thanks for the view and as always if you have any questions hit me up at :
exo_kutioner@hotmail.com
Thread
Thread Starter
Forum
Replies
Last Post
PTUNING
PPC: Engine / Drivetrain
3
Dec 11, 2014 08:09 PM
