Does anyone know how to make the Halo work on the JDM Projector Headlights?

Which wires do I connect them with?

__________________

 

I used taps to clamp onto the following colours on the wiring harness:

Passenger side colour code
Green/Orange(Red?) - Positive ---> Yellow
White/Black - Ground ---> Black

Drivers side colour code
Green - Positive ---> Yellow
White/Black - Ground ---> Black

 

thats for the parking lights right?

 

Yes its to the parking lights.

Thanks to MoonDog!

 

what about the led's do you have them wired to the turn signals? im getting mine on mon soi just want to make sure. thanks for the quick reply

 

I think everyone has them to their Turn signals cause that's the way I went. When I hit the blinkers they have an off and on replay between them
so when the Fog Lights come on the LEDs are off when the Fog Lights go off the LEDs come on back and forth like flashers in a slow motion.

__________________

 

thanks tim...love the halos!

 

so what are the wiring colors for the blinkers? same neg wire and the other positive wire?

 

for me, the blinker wire was the same color as the parking wire, except that there was a silver mark on the blinker wire. white wire with black strip is still ground.

 

Wiring them is the easy part. Adjusting them is the hard part. Anyone know how? Also make sure all the bulbs are easily removable. The quality control is off just a little. Don't wait until you need to change bulbs to find out they won't come out easily