Scion xB 2004 Overall Electrical Schematics
Thread Starter
Junior Member
Joined: Apr 2006
Posts: 6
From: Pennsylvania
Scion xB 2004 Overall Electrical Schematics
G'day All Concerned.
Newbie on the block but have been logged in for a while and chasing down, primarily, Audio wiring for the 2006 xB (Can't be beat).
I am trying to complete a ham radio install and need to run the receiver to the vehicle front speakers. I ultimately found the following:
Search: EWD529U on google
It came up with the page of:
http//www.myjdmphoenix.com/images/04_xB_wiring_manual/m_overallwiring/overalle.pdf
A complete overall electrical for the xB 2004 (even though mine is a 2006 Black cherry Red). I believe someone even slightly interested, may have use for the 28 pages of electrical info, immediately, if not sooner.
And thanks to all those who have unknowingly helped me with their additions to the forum. To the moderators, Bravo Zulu. Later, Enjoy.
Himmself! N6CFQ
Lititz, PA
P.S. What tool do I use and how do I remove the right and left door panels?
Newbie on the block but have been logged in for a while and chasing down, primarily, Audio wiring for the 2006 xB (Can't be beat).
I am trying to complete a ham radio install and need to run the receiver to the vehicle front speakers. I ultimately found the following:
Search: EWD529U on google
It came up with the page of:
http//www.myjdmphoenix.com/images/04_xB_wiring_manual/m_overallwiring/overalle.pdf
A complete overall electrical for the xB 2004 (even though mine is a 2006 Black cherry Red). I believe someone even slightly interested, may have use for the 28 pages of electrical info, immediately, if not sooner.
And thanks to all those who have unknowingly helped me with their additions to the forum. To the moderators, Bravo Zulu. Later, Enjoy.
Himmself! N6CFQ
Lititz, PA
P.S. What tool do I use and how do I remove the right and left door panels?
Senior Member
SL Member
Joined: Nov 2005
Posts: 1,282
From: SoCal
Himself, great find...Thanks for the diagram link!
Tools = hands.
Theres a plastic "push" fastener near the front edge, upper corner of panel (near sail panel) and two screws-inner release handle and inner door pull in armrest.
Door panels just pop off. Grab the inner plastic panel along the bottom edge, put your knee against the door metal so you can pull. Kind of give it a yank. Once one or two pop, the rest are EZ.
Tools = hands.
Theres a plastic "push" fastener near the front edge, upper corner of panel (near sail panel) and two screws-inner release handle and inner door pull in armrest.
Door panels just pop off. Grab the inner plastic panel along the bottom edge, put your knee against the door metal so you can pull. Kind of give it a yank. Once one or two pop, the rest are EZ.
Junior Member
Joined: Jul 2005
Posts: 7
From: South Central Virginia
Hello,
Could you please post photo(s) of your antenna install for the amateur radio?
I am thinking of installing a 2M rig in mine. Any ideas about antenna install will be appreciated.
Thanks in advance.
John
WB3HPE
Crewe Va.
Could you please post photo(s) of your antenna install for the amateur radio?
I am thinking of installing a 2M rig in mine. Any ideas about antenna install will be appreciated.
Thanks in advance.
John
WB3HPE
Crewe Va.
Thread Starter
Junior Member
Joined: Apr 2006
Posts: 6
From: Pennsylvania
HF Antenna Install.
Could you please post photo(s) of your antenna install for the amateur radio?
G'Day Jaloi,
You know you drive a Scion when People ask you if the "Antenna will make it weeble wobble and fall down!"
Nice to read from you, Sir.
With a three call you must be nearby. I am in Lititz, Lancaster County. I wonder how many other tickets are out there scooting about in their Trusty Scions?
Just returned CONUS and renewed my ticket, picked up the Scion and the plates and started the install. Anyhoo, be glad to send in a writ , on the antenna mounting. I do have the photos and such and only need to get it organized over the next day or so. Will start tomorrow.
As for your 2M install, take copius amounts of pictures. Keep me apprised, as I have not got mine installed, (Alinco DR-130), nor do I have the HTX-10 in either! Slow going for sure, as it is a one man task so far. Oh well.
Chuck EI4IS/N6CFQ
n6cfq@yahoo.com
G'Day Jaloi,
You know you drive a Scion when People ask you if the "Antenna will make it weeble wobble and fall down!"
Nice to read from you, Sir.
With a three call you must be nearby. I am in Lititz, Lancaster County. I wonder how many other tickets are out there scooting about in their Trusty Scions?
Just returned CONUS and renewed my ticket, picked up the Scion and the plates and started the install. Anyhoo, be glad to send in a writ , on the antenna mounting. I do have the photos and such and only need to get it organized over the next day or so. Will start tomorrow.
As for your 2M install, take copius amounts of pictures. Keep me apprised, as I have not got mine installed, (Alinco DR-130), nor do I have the HTX-10 in either! Slow going for sure, as it is a one man task so far. Oh well.
Chuck EI4IS/N6CFQ
n6cfq@yahoo.com
Thread
Thread Starter
Forum
Replies
Last Post
xdejablu3x
Regional - Mid South
0
Dec 29, 2014 02:15 AM
George
Regional - Pacific South
200
Feb 11, 2006 01:48 PM
