Hey guys. I should be getting my xA in on Tuesday and I am already looking forward to installing my stereo system. I know that I could go out and by the adapters to insure that the wires are all matched together, but personally, I see it as a waste of money when you can just wire them together yourself with same results. I have been looking online for an xA wiring diagram (which color wire is front left, which is front right so on and so forth) but I cannot find one. I can figure it out in the car, but this will take a lot longer. Do any of you guys have a diagram of the wiring or know a place online that I can pull it up. www.installdr.com is a great site for this type of stuff, but they do not have any scion vehicles there yet Any help would be greatly appreciated.

 

sorry bro, i dont remember what they are, i feel you on the waste of money thing, the only reason i have one on mine is because wen i bought the headunit online it came w/ free shipping and adapter

 

get the damn wire harness! It's not a waste of money, its only $15 - $20 at the local stereo shop, and saves a hell of a lot of headaches for anyone working on your car in the future.

 

the only way the harness can be a waste of money is if you plan on A) Never getting rid of your car, or B) plan on letting the aftermarket products go with the car when you do get rid of it... I think it's a much wiser choice to just fess up the $15 and get a harness for an aftermarket deck..

 

heres the wireing you wanted but just buy the harness.


DIRECTWIRE™ WIRING INFORMATION - SCION / XA / 2006 / Audio


[PRINT THIS PAGE]


Radio 12v blue/yellow + radio harness
Radio Ground white/black - radio harness
Radio Ignition gray + radio harness
Radio Illumination green + radio harness
Factory Amp Turn-on N/A
Power Antenna black + radio harness
LF Speaker +/- pink - purple +,- radio harness
RF Speaker +/- lt. green - blue +,- radio harness
LR Speaker +/- black - yellow +,- radio harness
RR Speaker +/- red - white +,- radio harness
Interface Module: Category:
Immobilizer Bypass Required:
No Type:
N/A
Part #: N/A
Notes:
Smart Starter Kill Relays: Not Available




This wiring information is being provided free of charge on an "as is" basis, without any representation or warranty. It is your responsibility to verify any circuit before interfacing with it using a digital multimeter.
Directed electronics, Inc. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case is and remains the responsibility of the installer. DEI assumes no liability or responsibility resulting from improper installation, even in reliance upon this information.

 

Ask Proshop or ViolentB there are reasons we use wire harnesses. I have installed for a few years and absolutely HATE installing with out a harness. Be cheap, go to walmart and get one.