I've sent several e mails and still have not heard anything.

 

pn#98105G Just found them here on the rock for $10.99 for a set + bolts. Goin to pick them up and put them on this weekend. Thanks for the DIY

 

"on the rock"

OT: Just returned from Oahu, saw a few modded xBs. Your weather is just outstanding! Better than SoCal.

 

Hope you had fun. Just try'n to get back into the car thing been fishing for the past few years and got my wife this car so I can play.

 

Does any one know if they make the sway bar bushings yet or know what P/N will work?

 

Energy suspension makes the bushings sway bar(front) base.

there are two types. greasable and non greasable
9.5158 greasable
9.5126 non- greasable

Don't know the difference, but i'm sure someone in here will tell us. The part numbers are for the 22mm sway bar, if im incorrect...

make my day

 

Just ordered them today hopefully they'll come in early next week. Here is the part number i used 9.8105r.

 

If you ordered from Summit you will get them in 2 days. They are very quick on shipping.

 

difference between greasable and non-grasable base bushing sway bar???????

 

does bushings do all fours including the fronts and the ends or just the ends?

 

this is just an endlink kit.

 

im newbie so is the mean just for the end?

 

This are the base sway bar, they come graesable and non greasable.
In the rear u don't use it, and IIIFFF u need them, they should come with the package, example progress rear sway bar, u don't install them, cause they don't come in the package.

 

so is this DIY for the front or the back?

 

Front.

 

The ones needed are not the ones in the pic. You need just the bushings and washers that come in the pkg. and you grease them before you install. You'll also need 2 4" grade 8 bolts and nylock nuts. These are just the outter bushings. The stock inners are too hard to change and don't really need to be changed untill they wear out in 10 years.

 

WEll got the bushings this week and thought it'd be a good idea to put them on this weekend but i couldn't find the bolts anywhere. Went to home depot, autozone, and discount auto parts and no one had them at least not long enough... Any suggestions where i can go???

 

any hardware store should have them.

 

yeap , ace is the place


with the helpful hardware folks , lol

 

Got mine fron Lowes. 4" was the longest they had.