i bought euroline dh from bboxd.
great rims, great guy mark!!
i installed it last night rear wheel rubs so badly so i took em out..
i searched the forum and found out that i need to roll the fender.
but i don't want to do it by my self because i worry about messing it..
does anyone knows a shop does rolling fender near LA, SoCal?
and that was for rear.

and for the front, it is rubing too.
i was thinking install cusco pillow mount camber kit.
does any one know it will help prevent rubbing?

your advice will be very appreciated!!

and my current setup is tanabe df210 with monroe sensatrac.
and OTG rear shim and OTG camber shim.
and the new wheel spec is 18x8.5 +25 front, 18x8.5 +20

 

just take a baseball bat and roll the lip flat...make sure to heat the paint. Also for the front make sure to replace the bolt that sticks out that connects the fender and front bumper because thatwill rub as well...

 

thanks for the input~
great help!!

 

IMO, it's better to get a 4" grinder and grind it away. It's prolly easier without risking of cracking your paint.

 

there's someone in LA that has a machine for it, get on the Scion Evolution So Cal forums there's a thread there.