I know this has been said by many many people before, but I'm getting interested in modding and just need a little info:

Been wanting to Bag it for quite some time and I've asked many people what they think about baggin. Some say alingment gets all out of whack, and I read on other post in the forum that the front parts have issues. Others say its good and alignment doesn't get out of whack too bad.

So, I need some pros and cons to baggin.

Also, the forums in here I read were about 6 months old, so has any new kits or fabrications come out since, like a front or back bolt-on kit?

NOTE: Money really is not an issue on it, I'm willing to pay a good price for the "cream-of-the-crop" baggin products. Also, I'm looking for a bag system that will lower it to the GROUND, and not just an inch or two.

 

www.randode.com for the rear brackets. They go in just like the stock springs, and are the lowest. That's what I'll be running.

Easy street for the front struts. They bolt right in. 5" of drop.

Piece the rest together.

There are plenty of bagged xB's out there. No real issues. Be aware if you live in a cold climate. Water in lines will freeze. This is the best option if you want to go super low.

 

Thanks man, I had figured such from readin some of the other posts and just wanted to be sure I don't get some cheap system that pops while im driving or whatnot.