HoTBoX009

Does this work with the stock spoiler on?

Big_Kokujin

Hai

hayalex6

^aka yes.

Subcompact Culture

When I use my washer nozzle (the way it was intended) it just runs down the glass, there doesn't seem to be much power ...

Big_Kokujin

It just looks that way...when you invert it, you probably get about a 6,7 foot stream from each outlet

Maicca

Wonder if it would be possible to replace the rear nozzle with one identical to the front..........with THREE ports!??

Big_Kokujin

Look under the hood, and see how they are anchored down...if they resemble each other then is should be easy, if not...fab time

xdorkx

But it points to the side, not straight back..doesnt it?

I'm doing this on my lunch break I think btw, lol, i've still got my wiper, but i raraly use the fluid for it, lol

it squeaks, so this i GOTT do, haha

Big_Kokujin

You can adjust where they go. but yes when you first invert it, it will spray at about a 45 degree angle

xdorkx

Nice, so hmmmm...i'm doing this on my lunch break I think, though I dunno if it'll be more fun to put it pointing UP or to the side a bit, lol, ALSO, when you're driving and squirt to the side...how far will it even go before the wind catches it and pushes it back

AH perfect solution

point it to the side, so when you're slow or stopped it'll squirt pedestrians.

ANND when you're drivin on the freeway, itll hit the car behind you!

bravo!

Big_Kokujin

I have mine point up, so i don't know about the side...but you can do one up and one to the side...

xdorkx

Mines a 2004xb.. anybody know how many nozzles i got on that? LOL

Big_Kokujin

I think only 1, i know the 05 has 1, so probably only on also

iankruk

sooo has anybody got an unsuspected victims?

Big_Kokujin

one yesterday...

xdorkx

I wasnt able to get this part done...i was able to un-screw them no prob, but how do you get those clips out? They're expanded inside the car...how do you close them so u can pull the light out?

Thanks

xdorkx

Come on, anybody? How do you get the actual light out of the body of the car....i unscrewed it..how do i pull those clamps out?

hayalex6

just pull, it takes a little effort. But just pull outwards, and they'll come out.

xdorkx

Hmm okay, i got it, but it wont let me turn it any direction I want to..the tab on the bottom fits on the notch on the bottom that only allows it to point DOWN.....

Thanks, man i hope i dont get in any fights over doing this, lol, but the BEST part is my spoilar conceals it, lol (once i get it pushed in, that is)

hayalex6

pull out at the angle of the metal that it's attached to:

/
/ -------->