I am going to install HID kits into the H4 (headlights) and my H7(foglight grill).. If any people have experience with wiring or mounting or color or power or brand or just about anything with HID's please let me know and pics would be appreciated
Thanks
_ben

 

It's really, really easy...
I have pics on my profile of 6000K (they came out bluer than they really are)

But yea, it's a cakewalk. Check out the sponsored sales section, there's two kits, selling for $160-170.

 

I am kind of looking for more a of a 4000k to 5000k for more of a white. How did you wire them?

 

Wiring them is very simple; it should take the common man about an hour. It pretty much involves grounding a wire to the frame and connecting a power wire to the batt. Then you would mount your ballasts in a place where you see fit and then plug the bulbs in and plug the wires from the ballasts to the harness and enjoy!!

You shouldn't have a problem. If so theres a ton of people here to help u.

 

I have a pretty good idea and my bro is a mechanic but also any problems with stock headlight housing when using HID's and where do most people mount them?

 

theres some holes to screw them down right behind the grill. A lot of people do it on top of the wheel well section on each side next to the headlights. but yeah, HID's are sick, it was the best 140 bucks i spent on the car i think.

 

6000K is really nice... the light is a lot whiter than it looks in the picture. It's a bright white with just a hint of blue.

And yea, it took me about 30 minutes to install mine.

 

I found a pair of h-4 bi xenon hid's I want to put into my foglights that take 9006 bulbs. How am I going to wire these?

 

i have 1 ? i just gota set of HIDs if i hook up the ground to a ground and pos. to the battery wouldnt the lights stay on all the time? how do the lights no when to come on and off?