Hello To all, I Just bought a used pair of tyc off someone here and they did not come with bulb and i dont know what to do or how to intalled them can some one hel pplzzzzzzzzzzzzzzzzzzzzzzzz

 

If you still have you stock taillamps the bulbs in your stock tails should work. just pop your hatch. Should be some bolt on the inside. Unscrew those and the lights should just pull out. Undo all the sockets and then replace them into the new taillamps. then just plug them back in.

 

I tried that and it is not the same bulb size

 

Try contacting http://www.elegantebytyc.com/contact.cfm they should be able to help with the proper bulb information. Taking out the OEM tail wire connection is a 1/4 twist to right (i believe) to take the connector off the back of the OEM's. Two nuts hold (a top and a bottom) hold the OEM's on. Same nuts are used for the TYC's. The wiring that comes with the TYC's adapt from the one connector used in the OEM's to the three individual lights with wires on the TYC's. Good luck. I am looking for the installation instructions, but I can not find them. If this does not help, let me know.

 

ok let me narrow down the question the problem is that i dont have the wiring kit that comes with the tyc tail light where can i buy it . because the guy who sold them to me did not have tjem and i did not know that to i got them

plz help

 

you have to get in touch with the person/place where you bought them...

it is supposed to come with it....

 

Contact http://www.elegantebytyc.com/contact.cfm, maybe you can buy the wiring harneses.

WW