I took apart my front end to take out the headlights but the wind blew all of my bolts out of order and now it seems that i cant find where these two bolts go can anyone help me please I have to go to work soon!

 

They look like the ones that go under the front end to hold the bumper on.... but then again, all the bolts up there look the same lol. did you get the ones for the headlights under the bumper on each side before you put it on?

 

They are from the bottom part of the bumper these are the only long ones the rest were short and I can't get these to fit any where.

 

They might be the ones that go to the bumper, from the wheel well area. They dont seem like they are going to fit until you start turning them, but they go in....the headlight screws were silver if I can remember right, bumper had the black ones.

 

The wheel well ones are black and the lights are silver then it goes tipped scres on the out side of the bottom bumper then flat screws the two tipped screws in the middle

 

here are one side of the bumpers screws, can someone give me an order from left to right facing the car

 

Facing the front of the car your pic looks like the way it sould be on the passenger side.
Long bolt on outside, short course thread next , fine thread next, and the other course bolt next.
I took mine apart this afternoon.

 

Thanx for the help guys, I was gettin so fustrated because I didnt want to screw anything up. All is well everything is put back together and to top it all off my bB emblem came in the mail so I'll have some pictures sometime tomorrow.