BAMFXB

I am trying to locate white rectangular leds for the halo's on my ANZO HALO Headlights. I can find every color but white. I think I need 2x5x5mm I'm not sure. they are pretty small. If anyone knows of a good place to find these please let me know.
Just so everyone knows what I'm talking about here is a pick of a colored one. I need white. the one below is green I need white.

snowromance

now why do you NEED a rectangular one? im willing to bet you can use something besides that specific shape LED which would then make availability much easier for you.

superflux, the real superflux's, are the way to go for automotive applications.

burstaneurysm

Check autolumination.com and see if they have something that is comparable.

BAMFXB

Retangular because that is the bulb thats in it now. Its a pretty small area that they go in and in fact the rectagular ones get smash, as is. I'll post pic so you can see what I'm talkin bout.








I found a site : http://www.china-led-lights.com/square-led-lamp.htm but it seems to be a bulk dealer from japan. So please if anyone has or knows of a site that sells these rectangular or square led bulbs IN WHITE let me know

BAMFXB

bump

jwaj2002

wow thats whats inside of my projectors? (I have the same ones) will round not work? like those really small ones?

BAMFXB

too small. I may have to grind them down. All I need is the light emitted in the front. The inside of the halo housing has a difuser to dispence the light. We shall see what I come up with.

jwaj2002

what about 3mm ones?

BAMFXB

Ahh good Idea. I just need to figure out what type of resistor I'd need. Plus I don't know if they'd put out enuf light.

jwaj2002

you could do the 3mm or the superflux I bet I want to change mine out with red

BAMFXB

Just be careful when dissasembling. You may want to take some pics. before I didn't and I regret it. I'm gonna have to wing it on reassembly.

jwaj2002

lol well I need to swap in my stockers so I'll post pics up

BAMFXB

Found some and got them in and I think I may have changed my mind.
I think I'm gonna try and cut a channel in the exsisting halo's to fit some sort of cold cathode. Now I just need to find the right size and length. They would be the same as those angel eye kit we see so often on the TC. except these will need to be bent to a 4" circle with a circumfrence (length) of 14" for the big one and a 3" diameter circle with a circumfrence (length) of 12". Does anyone know where I could find a cold cathose made to this size or even one close.???????

jwaj2002

oznium.com

BAMFXB

Those ones are just a straight tube I need them as I said before in a circle with a 4" and 3" diameter length of 14" and 12" to complete each circle. You know like the angel eye kits on the TC

mrfuzzy4

whats at the center of the bbist ones?! same thing? dissapointing...

jwaj2002

they have round too
http://www.oznium.com/circle-ccfl

doggy

Just take 5mm round ones, and carefully sand them down to needed shape, after this - just use some 600 / 1000grit sand paper, and some car polish - and you will be set to go ;)

BAMFXB

Ok so I now know what I will be going with the Halo's in fact the order is in the mail. It is called ELWIRE and thanks to DAGARHART My halo's will be up and running soon. This is a pic of 5mm wire I have ordered 2.3mm and 3.2 mm that I will place side by side to even further custon the look. here is the pic.: sorry it is so huge...



I'll post more when it is complete...

BAMFXB

Disregaurd. follow this post:

https://www.scionlife.com/forums/vie...758&highlight=