What is this for??
Originally Posted by hotbox05
the cupholder/ipod thing is 06 models only...
as for the shipping. they use the underneath hooks for that. two in the rear... not the tow hook.
as for the shipping. they use the underneath hooks for that. two in the rear... not the tow hook.
Originally Posted by LunchLady
Well I know for sure I didn't get the cup holder thingy.
Are those suppose to come with the 2006 xB's? There are so many holes under that car I'm not sure which ones are suppose to be plugged. I'm going to take the pic's with me to the dealer when my plates come in and show them. But only if these items are to come with the 2006. Thanks for your help 
Well LunchLady, while you were "picture in hand" I was under my camobox for the first time and took a couple more pics.
The center of this pic is the approx. area where the plug would go on the drivers side taken from beside the box.

This pic is taken from under the center of the vehicle looking sideways to where the camera was in the first shot. The oval shaped hole in the grey frame member in the center of the pic needs plugged.

Straight up shot of hole.

Hole plugged.

Drivers side rear shipping tie down, right behind rear axle, there is one on each side.
The center of this pic is the approx. area where the plug would go on the drivers side taken from beside the box.

This pic is taken from under the center of the vehicle looking sideways to where the camera was in the first shot. The oval shaped hole in the grey frame member in the center of the pic needs plugged.

Straight up shot of hole.

Hole plugged.

Drivers side rear shipping tie down, right behind rear axle, there is one on each side.
^^^^^OK OnebadBox...I found the holes!!!!
One on each side in the rear. Now is there holes in the front too? I do not have plugs for these nor were there any in the car when I took possession. By the way thank you
Looking at my second pic (from below the car) you can see that the hole is a couple of inches higher than the lowest point at the edge of the car. I don't think it's possible to see the hole unless you are under there. You may be able to see the hole on the opposite side from where you are, or just use the pic to orient yourself with what's under there and feel around for it.
Originally Posted by neon11
I'm still trying to figure out the sponge rubber thing that was sitting the cupholder when I picked it up.
it looks like the new ipod nano would fit perfectly in it too.
Originally Posted by OneBadBox
Looking at my second pic (from below the car) you can see that the hole is a couple of inches higher than the lowest point at the edge of the car. I don't think it's possible to see the hole unless you are under there. You may be able to see the hole on the opposite side from where you are, or just use the pic to orient yourself with what's under there and feel around for it.
Hey supertoaster...You have the TRD Exhaust right? How does it stock out the rear significantly? I have one too, but after I got into an accident, I've noticed mine is a bit pushed back... and... is lower than usuall... hrmmmm
I got shafted on the cupholder/ipod thing! We got an '06... no holder thing. oh well, we got it for the price of an '05.
If you remove the spare tire you will find the screw that goes into the sqaure hole in the original question. It is a tow point. This concept is used on a lot of cars where air drag is a big deal.. check out some of the upper end BMWs and Mercedes.
If you remove the spare tire you will find the screw that goes into the sqaure hole in the original question. It is a tow point. This concept is used on a lot of cars where air drag is a big deal.. check out some of the upper end BMWs and Mercedes.
Originally Posted by pdxbubba
I got shafted on the cupholder/ipod thing! We got an '06... no holder thing. oh well, we got it for the price of an '05.
If you remove the spare tire you will find the screw that goes into the sqaure hole in the original question. It is a tow point. This concept is used on a lot of cars where air drag is a big deal.. check out some of the upper end BMWs and Mercedes.
If you remove the spare tire you will find the screw that goes into the sqaure hole in the original question. It is a tow point. This concept is used on a lot of cars where air drag is a big deal.. check out some of the upper end BMWs and Mercedes.
Originally Posted by LunchLady
Originally Posted by hotbox05
the cupholder/ipod thing is 06 models only...
as for the shipping. they use the underneath hooks for that. two in the rear... not the tow hook.
as for the shipping. they use the underneath hooks for that. two in the rear... not the tow hook.
Originally Posted by hotbox05
Originally Posted by LunchLady
Originally Posted by hotbox05
the cupholder/ipod thing is 06 models only...
as for the shipping. they use the underneath hooks for that. two in the rear... not the tow hook.
as for the shipping. they use the underneath hooks for that. two in the rear... not the tow hook.
Originally Posted by OneBadBox
I was unable to locate holes in the front.
All else fails read the directions, ie; The OWNERS MANUAL !!
It's all there. In black and white...... But beware if you don't read the manual about towing your xB with the Hook that goes in that little hole......If you have an automatic!
It's all there. In black and white...... But beware if you don't read the manual about towing your xB with the Hook that goes in that little hole......If you have an automatic!
Originally Posted by LunchLady
Originally Posted by hotbox05
Originally Posted by LunchLady
Originally Posted by hotbox05
the cupholder/ipod thing is 06 models only...
as for the shipping. they use the underneath hooks for that. two in the rear... not the tow hook.
as for the shipping. they use the underneath hooks for that. two in the rear... not the tow hook.






