thats a great mod, simple at that too!!!

 

Very clean... is it a rear door handle swapped in?

 

it is a passenger side cap.

Retail is $12.75 + tax.

69217-12040-R5 / color code 8S6
69217-12040-X3 / color code 3N0
69217-12040-V2 / color code 8U3
69217-12040-P1 / color code 1F7
69217-12040-A0 / color code 040
69217-12040-C2 / color code 209

Thanks to N2HTWLZ for telling me about it

You're dealership should be able to order it for you.

 

I assume you just pop off the original and pop on the passenger side cap???

 

You open the door and there is a black round cap that pops off. It shoul be at the same height as the door cap. it pops off, and you remove the screw in there, the whole lock mechanizim slides out and the cap slides right in. re screw it in and place the black cap and your done. I did it in like 2 minutes.

I'll take some pics and show you when I get off work.

 

Thanks Jon! Pics would be great.

Just placed my order for the cap so it should be in by Wednesday.

 

No problem TunerChick. here's a quick Do-It-Yourself guide

Find the black cap that covers the door lock assembly as shown below.



Then you'll need to remove the hex bolt. It's a little tight, but once it's out the lock and cap just slide right out.





Factory key lock


Once you have it removed, you just install the cap exactly how the key lock came out. Re-screw it in, re-insert the black cap and you're done!

 

Awesome pictures for the DIY... I had keytechniques covers in my 1st-gen, I've been looking for something like it ever since. I'll be ordering this soon!

 

thanks for the tip! i just did it to my 07 tundra to!