I installed a LED underglow kit on my xb2 but i'm really second guessing where i put the front one

how can i install the front LED without it breaking? seems like there is no where i can put without it being safely mounted..

i need help

 

hey mang!

When me and a buddy of mine installed his on second gen we noticed there are 4 holes on the plastic skid plate that you can easily put zip-ties on and just crank them down on the underglow. His is a daily driver and hes had them on for a few months now with no problems.


Hope this helps

 

Thanks for the reply


I did that but my car is lowered with tanabe df210. And I already broke the housing of the front tube. I'm trying to find a better place to hide it.


Thanks

 

hey is too. hmmm the only other thing I could think of would be to push it back and drill new holes. but if your lowered and have underglowers your just going to have to be extremely careful

 

dude all you need to do is take of that front plastic skid plate. i believe its 4 bolts that hold it on and it slides off. I have neons under mine and i removed it and stuck it up inside where the skid plate was blocking. you dont need that piece i havent had mine on for a year and a half. its works fine and you wont crack any more housing or anything for that matter. I myself have tanabedf210's and im riding on 19's so i know what you mean.

 

I would be kinda hesitant to take out the skit plate you know thats in there for a reason right. It channels wind and decreases road noise not to mention it protects the undercarriage but at the same time if the lights are important to you enough go for it.

 

i had it there too, but once i dropped it on the tanabe df210 i noticed that it was to low, so i just relocated it to the inside of the plastice, now it doesnt shine under the car it just glows through the grills, its cool, i dont mind it, i rather not remove those plastic parts.