S-tech Install Questions (HELP!)............
I just installed my s-techs and the front looks bad ___ but the rear is still pretty high up, it kind of looks as if it hasnt lowered at all. So should i wait until it settle's and see if it drops some more or should i see if it's installed wrong? How long should it take for the springs to settle and is it normal for the drop to be uneven. For example: the rear passenger side has a 4 finger gap and the driver's side has a 3 finger gap, is that normal at this early stage of being lowered? By the way im also running koni yellow shocks. Thanks
its alright if one side is lower then the other but it should be barely noticable. it shouldnt be such a big deal. check if you cut the bump-stop that may keep your car from going as low as its supposed too. so if its to lob-sided then you did it wrong
Thread
Thread Starter
Forum
Replies
Last Post
wiltonhall
Scion xA/xB 1st-Gen ICE & Interior
4
Jun 23, 2025 10:09 PM
Beesh
Scion xA/xB 1st-Gen ICE & Interior
3
Jan 9, 2015 06:30 PM
TheRedBox
Scion xA/xB 1st-Gen Drivetrain & Power
31
Dec 2, 2003 04:53 PM






