Well if you want the Rumion front emblem (http://www.newscionparts.com/product/?id=2798) , you might want to get your order in to Carson's pronto because maybe it can still get included/shipped from Japan with the last batch they've had back-ordered for well over 6 weeks.

 

Six weeks!? Man. Maybe I'll have to give them a call.

 

Woohoo Just installed my toyota badges on my '12 XB.

 

This should have been on the car from the start.. it says toyota on the entire car! the glass, the doors, the hood, the wheels, etc.. even the registration says toyota. I bet the camry engine cover with the red lettering and toyota logo should fit too! anyone try this?

 

Yes. I have a Matrix/Vibe engine cover on mine.

https://www.scionlife.com/forums/sho...d.php?t=211743

 

can the rear emblem be removed without taking the inside cover off? just wondering if the pins on the emblem have nuts or keepers on the backside of it inside of the liftgate... or can it be removed directly from the outside with some heat and fishing line?

 

Heat and fishing line is all you need. No bolts.

 

'08-'10 Corolla Rear emblem--PN--75431-02080

2011 Sienna Front emblem--PN--75441-08020

This is what i used for my '12 and the fit is perfect

Bought these from Carson Toyota

 

Ok cool...thanks

 

Yea i used a lil plastic scraper thing but i was really careful to only et the glue and not the paint

 

anybody change the emblem on the steering wheel yet? I see how to do it ...but wanted to see if anyone else has yet...

 

I thought about it...but didn't know where to get the emblem. Looks like it should just peel off and you could put the Toyota one on.

Do tell, do tell!!!!

 

How dO u get it off? Ive seen some on ebay for like $5. Been wanting to do this too just dnt know how to take it off

 

Since I found out the part number to do my front and rear emblems from this thread I will share what I found out about the horn emblem...you cannot peel it off and put a toyota emblem on... you will need an airbag cover, I found that the RAV4 uses the same steering wheel on some models, you can go on ebay and look up "driver airbag cover toyota rav4" and you will find something like this...






you can get them with or without the airbag, I chose without, you will need the first few steps of the instructions here>> http://www.trdsparks.com/install/08460-12820inst.pdf
then unscrew the airbag and place on your new cover...
I will post more pics after I get them uploaded.
Good luck...

 

I was mislead and this part does not fit... Do not waste your money like I did. The only way to change the emblem is to obtain either a Rukus or Rumion wheel cover...
Sorry for posting wrong info but got my information from a so called "reliable source".

 

I just received my Rumion front emblem from Carson (http://www.newscionparts.com/product/?id=2798) and HEADS UP! for those looking to buy/install.
This appears to be a newer Toyota Japan part #75311-12B70 which, at 3-5/16" high x 4-7/8" wide oval, is slightly smaller than the '11-12 OEM Scion emblem or it's backing plate at 3-3/4" high x 5-1/2" wide.

See excellent pics in js2sta's recent thread looking to trade for the earlier version (part# ending in A90)
https://www.scionlife.com/forums/sho...d.php?t=215317

This means the new version is going to fit slightly differently on '11-'12s than the older version pictured below...


Which required the following cut out of the bumper (sorry, I can't remember who to credit for these pics from their install).


I'll try to superimpose the new Rumion emblems circumference onto the actuall bumper recess to ensure it covers the tab slot recesses and post asap.

 

It's from kage78's thread
https://www.scionlife.com/forums/sho...d.php?t=206154

so I guess you were the one Jose from Carson Toyota is talking about.. I cant wait to get the early style Rumion front emblem..

 

Anyone here happen to install the newer rumion badge already?

 

if you're talkin' about the new version of Rumion Emblem installed for 2011-2012 xB. none so far..

 

The good news is that you can still get the 75311-12A90 "old" style emblem with the raised edge/lip on the backing plate that will fit true into the '11-'12 bumper recess. You just have to specify that you don't want the new 75311-12B70, which Carson's and y'all now know is different.

Thank you Jose for your help and Carson's for standing behind your customers and providing me a call-tag to retrieve the B70 and ordering me a A90.