im selling my zpi stage 1 turbo kit off my tc .......and will fit right on the new xb becuz u have the tc motor ....so if anyone is interested let me kno im selling it for 2500 ...ask for mike 321 239 8460 comes complete with everything great kit havnt had it that long and ran 12.53 at 113mph off 12psi ...and it would be great to see a new xb just as fast .......reason for selling im fully building my motor again and for the power im pushing it useless ...so let me kno if anyone is interested

 

Be careful before you go promising that it will fit directly in the xb2 engine bay. I was under the impresison that the layout and dimensions of the 2 engine bays are different. I believe there would be an issue with the piping fitting correctly.
I'm not trying to steal your thread, I just dont want anyone to be dissapointed.

 

Not to mention the fact that the motors are different internally. The xB2 actually has the revised version of the tC motor, with higher compression and some other small differences. Plus, the ECMs are completely different. If this kit was drop-in, every trbo manufacturer would have figured it out at launch instead of developing new kits.

 

Yeah it definitely needs a new downpipe too!

 

Gotta have 50 posts to sell anything on SL.

 

manifold and turbo might fit but all other piping is going to be different.

 

I was under the impression the manifold Would NOT fit. That it hits the firewall.

 

How? The new xB has the exhaust manifold in the front of the engine. Might be close to the radiator if anything.

 

I dont' think a stage one would fit, but a stage 0 might.

 

Only difference is the piping.

 

Right...the pipeing is what I'm saying wouldn't fit.

 

its the intercooler pipeing that wont fit

 

Yeah...that's what I'm talking about.
but then again, I dont' know if there is anything in the way of hte downpipe and spipe either.

 

I believe the downpipe will fit but the s-pipe is just slightly different.

 

well, that should be fine cause I don't think the zpi kit came with an s-pipe, so as long as the downpipe and s-pipe mate up...

 

Well im sure the s-pipe is positioned differently so you'll either need a custom s-pipe or custom/modified downpipe.