DIY: Replace Blower Relay
12-01-2018, 07:56 AM
#1
Junior Member
Thread Starter
Join Date: Nov 2018
Posts: 7
DIY: Replace Blower Relay
This is for 2008 XB.
If the blower fan doesn turn on at any speed or randomly works then it could be your blower relay is not switching on. If your fan works only on High setting then its more likely your blower resistor.
Panel: It pops out, no screws
Side of Interior Fusebox exposed showing Heater/blower Relay(Blue)
The blower relay, note the model and shape, many places are selling the wrong relay.
Printout from Toyota dealer showing inside electrical components and their ID numbers.
Blower Circuit Diagram
Blower Switch connector
Blower Resister Connector
Blower Switch:
1 White - LED(-)
2 Black - Defrost
3 Yellow - Defrost(IG+)
4 Orange - Low
5 White/Black stripe - Gnd
6 Blue - High
7 Green - LED(+)
8
9 Red - Medium1
10 Dark Blue - Medium2
Blower Resister:
1 Blue
2 Red
3 Dark Blue
4 White/Black stripe
If the blower fan doesn turn on at any speed or randomly works then it could be your blower relay is not switching on. If your fan works only on High setting then its more likely your blower resistor.
Panel: It pops out, no screws
Side of Interior Fusebox exposed showing Heater/blower Relay(Blue)
The blower relay, note the model and shape, many places are selling the wrong relay.
Printout from Toyota dealer showing inside electrical components and their ID numbers.
Blower Circuit Diagram
Blower Switch connector
Blower Resister Connector
Blower Switch:1 White - LED(-)
2 Black - Defrost
3 Yellow - Defrost(IG+)
4 Orange - Low
5 White/Black stripe - Gnd
6 Blue - High
7 Green - LED(+)
8
9 Red - Medium1
10 Dark Blue - Medium2
Blower Resister:
1 Blue
2 Red
3 Dark Blue
4 White/Black stripe
Last edited by chiuchimu; 12-17-2018 at 11:12 PM. Reason: Update
Thread
Thread Starter
Forum
Replies
Last Post