What's needed for Aftermarket Head Unit?
#1
What's needed for Aftermarket Head Unit?
Hey guys I'm looking to Upgrade my Stereo on my 2010 Box. I'm looking at a Pioneer DMH-1500NEX:
https://www.crutchfield.com/S-o5ZKbZ...H-1500NEX.html
What else would I need to get to keep seeing wheel controls? I was also wondering if I could route the USB port to where the stock one is in the Center Console.
I've read threads mentioning an Axxess harness but I'm not sure.
Any tips are welcome!
____
https://www.crutchfield.com/S-o5ZKbZ...H-1500NEX.html
What else would I need to get to keep seeing wheel controls? I was also wondering if I could route the USB port to where the stock one is in the Center Console.
I've read threads mentioning an Axxess harness but I'm not sure.
Any tips are welcome!
____
Last edited by MR_LUV; 07-11-2020 at 05:05 PM.
#2
You'll need a mounting kit to cover the gaps on the sides of the radio
Wiring harness to adapt over the stock plug to the Pioneer ones
For steering wheel controls you'll need either a Metra Axxess ASWC-1 or Pac SWI, I prefer the Metra unit.
And, no you cannot use the factory USB port but you can route a USB cable from the back of the radio under the center console and mount the end of it where the stock one is currently.
Wiring harness to adapt over the stock plug to the Pioneer ones
For steering wheel controls you'll need either a Metra Axxess ASWC-1 or Pac SWI, I prefer the Metra unit.
And, no you cannot use the factory USB port but you can route a USB cable from the back of the radio under the center console and mount the end of it where the stock one is currently.
Thread
Thread Starter
Forum
Replies
Last Post
aghily
Scion xA/xB 1st-Gen ICE & Interior
4
03-31-2019 06:23 AM
Cintron
Scion xD ICE & Interior
3
07-14-2012 01:30 PM