Jay, you have PM so that we don't clutter this info thread with back & forth questions about wheels that you might or might not be interested in.

 

Whats the smallest offset we can install on our cars?

 

It all depends on wheel width, tire stretch, fender rolling & pulling, and how low you're dropped. There is no flat answer for offset alone that will address the many variables that can be involved.

 

Is there a way to figure it out? I will be getting adjustable coilovers here in a few months and rims and tires as well. Trying to get a staggered fit as well.

 

Here are pictures of NoLimitz' xB. He has 19x8.5" fronts and 19x9.5" rears that are all +38 offset. He is dropped down low on Ksport coilovers. His tires are 235/35 front & 245/35 rear.

https://www.scionlife.com/forums/viewtopic.php?t=223479

See how you like his look, then check out what sizes & offsets the wheels you want are offered in. Send me a PM and we can work out what you're trying to accomplish without clogging up this stickied thread.

 

Thank you I will.

 

Not quite sure where to ask this but...

Any idea as to WHY the 19" TRD wheels are so damn expensive?!?

 

Well I'm gonna say, if you are getting the wheels from the dealership, then they are so damn expensive 'cause they are just trying to make money off of them....

 

What do you consider expensive?

http://www.trdsparks.com/displaypart...&parts_id=1568

If you buy them from the dealership, they come with tires, mounted and balanced, and with the TPMS sensors swapped out... plus a little extra profit I'm sure.

 

I guess when you break down the pricing for all that stuff, it's not really THAT bad.

LoL

 

i just picked up a set of axis elites 19x8 with a +35 offset i was told that they hella flush :D i just have to buy tires now. right now im running 18x8 with 45 off set they are the xxr 504's

 

XXR 002's 16x8 +0 , 195/50 Little Stretch Dropped on K-sport coilovers.. Nice

 

whats the offset on the 17" factory wheels? im looking to get 17" aftermarket wheels, but dont want to have issues when it comes to offset or anything for that matter. The box isnt dropped at all. dont think i will drop it.

 

Find wheels you like and I'll help you with offset. I'm not positive, but I believe the OEM 17x7's are +45 offset.

 

@XXR 002's 16x8 +0 , 195/50 Little Stretch Dropped on K-sport coilovers.. Nice

those xxr how do they feel?

 

this is a zinik (cheap) 19x10 +25 with 235/35/19 on the rear with ksport GT springs.

Fully loaded it will not roll. (meaning 4 people)

with just two it is tucked.

with the fenders rolled and liners removed it rolls just fine under load, but I would NOT recommend this setup without camber - which is happening soon.

you CAN fit a 10 +25 in the rear no problem with some poke (it looks right) but camber would make a big difference and would honestly make it look killer.

 

2009 xb
I am looking at some Enkei Racing RSF-2 rims and tires 17x7 offset 40 bolt pattern is 5/100 or 5/114 wheels and tires are 215/45/17

do you see any fitment issue with the rims and tires? i am planing on doing the TRD shocks and springs on the car will the 40mm offset cause any issues? thanks.

 

^^ You're good to go, absolutely no fitment problems or rubbing whatsoever.
Your selection has been approved, and you may place your order now.

 

We need a fitment thread...

19x9.5 +45 fronts and 19x9.5 +25 rears. Axis Super Hiros, 235/35R19's. Rear fenders are rolled and slightly pulled. Need to do a little more work, rubs just a tad. DF210's.


Photo courtesy of my buddy Kyler. :D

 

Do you have Tires and Rims for sale?