Are our brake parts swapable with the Yaris like almost everything else chassis-related is? I really wanna put some slotted rotors and RedStuff pads on the front and some decent drums on the back but there doesn't seem to be anything out there yet. Anyone have any suggestions? I gotta do something about the pads and rotors cause my braking is getting really bad as of late...

 

The Yaris is 4 lug. XD 5 lug

So that's No in regards to the front discs and rear drums.


Regarding the pads, I'm not sure. I believe the front pads from the xd are a little larger than the Yaris ones. The design is pretty much the same tough.

Easiest thing would be go to the parts store and ask for Yaris and xD pads and put them side by side.
Same thing for the rear drum shoe pads.

There are performance pads and shoe pads available for the Yaris... so you could use those.

In regard to slotted front discs, you can contact R1 rotors and just gave the the measurements of the xD rotors (If they don't already have them) and they can machine a set for you. They have alot of blank rotors. They just need to find the closest and machine it.

Microimageonline.com is a distributor of R1, they can probably help you. (Same store that will be carrying the NST u-Pulleys)

 

Ugh! I didnt think about that!!


Thats why I decided to post, I work for an auto parts store (O'Rielly) and no one has them, they all show that no one makes rotors or drums or rear shoes for the drums. I've even called all of our contacts at NAPA, Advanced, Pep Boys, freakin everywhere and no one has them...

Thanks though...

 

what about these parts I know is from ebay but it look pretty good
this one for $133
:http://cgi.ebay.com/ebaymotors/SCION...Q5fAccessories

Big Brake Kit - Scion xD (0 2-piece front 330x30 4-piston
[RBK228.01] $1,767.25
http://www.festivegarage.com/brake-s...on-p-7695.html

 

That looks pretty nice, they say bigger wheels may be required to fit these? Would stock 16" not work? would you need 17"?

 

yeah you need 18" i believe because I have 17" right now and there only about an 1" gap between the wheel and the rotor

 

So you have a set of these? Very nice.. could you post up some pictures of it on your D?

 

no yeah right i seen it I'm broke right now

 

and i never heard of this brand before like I would get it

 

imageex and mynam3isazia have the same picture for their avatar!!
AHHHHHHHHHHHHHH

haha sorry :D ive been waiting to get you guys to post one under the other so i could say this

 

wow TRD... ghahahhaa

 

haha sorry :D couldn't resist!

back to topic!

 

haha you right

 

hace you looked at tc parts same bolt pattern 5x100 prod. be able to do something with that

 

rotora is a good brand

 

just because they have same pattern doesn't mean they use the same parts. its already been posted that both cars use different rotors and calipers

 

if your on a budget also: http://cgi.ebay.com/ebaymotors/Scion...QQcmdZViewItem