MobileHID.com - The Best Waterproof HID Conversion kit!
Joined: Nov 2007
Posts: 7,369
From: Jacksonville, FL
Originally Posted by Just1n
Originally Posted by Dam262a
Originally Posted by Just1n
click on link:
http://vozme.com/speech/en/ea8a2136b...7ce0e458bd.mp3
http://vozme.com/speech/en/ea8a2136b...7ce0e458bd.mp3
http://vozme.com/speech/en/9cb28c7b6...883c3fe09e.mp3
Hey Cliffud, is it going to overload my system if i have 3 sets of ballasts in my xB, i have 2 sets at the moment, (8000k in the headlights and 3000k in the fogs) but i am wanting to put some 12000k in the high beams but not if i am going to burn it down...lol...let me know and i will probably be placing an order in the next week or so
Thread Starter
Senior Member
SL Member
Joined: Oct 2006
Posts: 1,289
From: Phoenix, AZ
Just1n - yep, that's your old R1 is on the site.
Unit_xEr0 - glad you got it hooked up w/o a hitch, your HID system will be much better off now that it's getting the proper power it should.
Dane - you won't burn down the ride bud.
Believe it or not, when running 3 sets of lights you'll still draw less wattage than 2 sets of halogen bulbs.
HID: 3 sets x 2 bulbs per set x 35 watts/per = 210 watts
Halogen: 2 sets x 2 bulbs per set x 55 watts/per bulb= 220 watts
Wait for the e-mail before you order the 12k though... ;)
Clifford
Unit_xEr0 - glad you got it hooked up w/o a hitch, your HID system will be much better off now that it's getting the proper power it should.
Dane - you won't burn down the ride bud.
Believe it or not, when running 3 sets of lights you'll still draw less wattage than 2 sets of halogen bulbs. HID: 3 sets x 2 bulbs per set x 35 watts/per = 210 watts
Halogen: 2 sets x 2 bulbs per set x 55 watts/per bulb= 220 watts
Wait for the e-mail before you order the 12k though... ;)
Clifford
Administrator
SL Member
Administrator
Joined: Dec 2007
Posts: 2,583
From: State of Confusion: CA
Clifford,
Checking out the Gallerys on some of the beautiful 1st gen xBs, I notice that some owners went with the Projector Headlights mod.
Does your Basic H4 Conversion Kit also work in the Projector Headlights?
Or require Special Modifications? Any Tips or Special Instructions on what to look out for?
What if I put your Kit in stock headlights first and decide later on to Upgrade to PH?
Do you need to know beforehand because of the length of the harness might change?
I am looking forward to my order.
Thank you.
MR LUV
Checking out the Gallerys on some of the beautiful 1st gen xBs, I notice that some owners went with the Projector Headlights mod.
Does your Basic H4 Conversion Kit also work in the Projector Headlights?
Or require Special Modifications? Any Tips or Special Instructions on what to look out for?
What if I put your Kit in stock headlights first and decide later on to Upgrade to PH?
Do you need to know beforehand because of the length of the harness might change?
I am looking forward to my order.
Thank you.
MR LUV
Thread Starter
Senior Member
SL Member
Joined: Oct 2006
Posts: 1,289
From: Phoenix, AZ
Hey Mr. LUV-
I'm not sure the H4 bulbs will work in a projector headlight simply because the projectors may require a diff bulb type. For example, Chris' first gen xB in the gallery has a Zomk projector set and it required a 9006 bulb.
For the stock H4 kits, all the modifications necessary are already done before they are sent out so what you get is a very easy kit where all you have to do is plug stuff together. The bulbs are side specific and the bulb with the black 2-prong plug goes on the passenger side. (sounds vague but it will make sense when you see the kit)
Later if you upgrade to a projector housing, the only thing you'll need is a diff set of bulbs, the wire harness can stay where it is and there will be no change in length required.
BTW - you should have your kit tomorrow.
Thanks.
Clifford
I'm not sure the H4 bulbs will work in a projector headlight simply because the projectors may require a diff bulb type. For example, Chris' first gen xB in the gallery has a Zomk projector set and it required a 9006 bulb.
For the stock H4 kits, all the modifications necessary are already done before they are sent out so what you get is a very easy kit where all you have to do is plug stuff together. The bulbs are side specific and the bulb with the black 2-prong plug goes on the passenger side. (sounds vague but it will make sense when you see the kit)
Later if you upgrade to a projector housing, the only thing you'll need is a diff set of bulbs, the wire harness can stay where it is and there will be no change in length required.
BTW - you should have your kit tomorrow.
Thanks.
Clifford
Senior Member
SL Member
Scion Evolution
Joined: Oct 2006
Posts: 542
From: Chicago, IL
got your email, im excited, my friend has been bugging me bout getting a set for his car, he was ____ed when i told him that i got the kit for 140 before and he wouldve gotten them. Will talk to him and see if he wants a set now.
Junior Member
Joined: Dec 2007
Posts: 4
Originally Posted by megrog2
Im interested in the 4300K kit but with D2S bulbs to fit in a TSX projector, is that possible.
I actually emailed Clifford about a week ago, asking about it (quick response too)
Still not sure if I will make the plunge just yet though.
I'm hoping I can get good ol' Mom to get me the kit for Christmas and save me some money.