I just installed some Anzo tails yesterday and the problem I'm having is that the parking lights don't work. The brakes and signals work fine. All I did to install them was connect the electrodes and stick the ballast(?) on the inside frame of the car.

 

i played around with it some more and figured out that the ballasts or whatever they are control the speed of the individual blinkers but don't seem to affect anything else. i tried switching around the plugs some more but only managed to change which half of the light blinks for the blinkers...

the fuses look fine but is there anything in particular i should be looking for that would indicate they are messed up?

 

either a fuse is blown, plugs are not hooked up right, or the lights are defective. Try disconnecting your battery, switch a plug, and reconnecting your battery. If that doesn't work, disconnect battery again, and try switching the other way. Good luck and if you solve it please post what happened.

Check these two threads out, some other people had problems with the Anzo install:

https://www.scionlife.com/forums/viewtopic.php?t=212982

and this one:

https://www.scionlife.com/forums/vie...oblem&&start=0

 

Do you need a socket wrench to disconnect the battery or is there an easier way? Positive or negative side?

 

I unhooked the battery and played around with the connections...no luck, same problem

i think im gonna have to return these or (hopefully) get an exchange...

 

Anyone know what color the wire is in the fuse box for the parking lights?

 

Excuse my newbieness but i finally fixed it. Turns out the fuse was blown. But I learned alot with my first electrical mod. Thanks for the help ilovemytc