Hey

Everyone i have been searching for a ballast for my anzos because it was melting on me for my headlights due it rubbing against the frame . the serial number for it is

RN0581V

Can anyone please direct me to the right place in finding this . i have searched like crazy on here and on ebay and no luck.

Thanks in advanced.

 

use any ballast you want theyre universal i have eagle eyes its the same company and i have 3 sets of hids just a normal 9006 connection and the +/- to the bulb just make sure you order the right wattage i think the stock anzos are 35w ballasts

 

good digital ballast right here...

http://www.retrosolutionsllc.com/ser...VERSION/Detail

 

- jasongawlik0313

Im not sure if its the same one where talking about . i dont know if you have seen the little rectangle block located on the bottom of your headlight housing. Thats what was melting i removed it from the bottom of the headlight to keep it from melting . it has two cords on one end a blue and green and the other end has 4 or five cords also . i will take a pic of it when i get home so i can clerify what im talking about .

 

alright i found these pics this is exactly of what i need except its a different serial number

 

that's the transformer for the halos, try one of the ozniums cold cathode transformer and see if that works.

 

god that's a scary wiring job...lulz

 

thanks acid drop.

I had figuered it out the day before your post i bought a cold cathode off a 2001 bmw m3 series and it worked like a charm the wiring was not so bad i replaced both headlight cathode just incase the other one burned up .

 

that's cool, good to hear you where able to fix the problem.