sciontc6.0

delete those license plate holes

http://www.8thcivic.com/forums/exter...ome-depot.html

without drilling use .315 nylon fastener UPC#030699459384

Spicy_McHaggiz

iTrader: (1)

Doesn't actually get rid of them, more so covers it.

sciontc6.0

yeah w e still looks better then a ugly hole in ur bumper

Eziekel

iTrader: (1)

it still looks ugly IMO. best way is to just follow the law and leave ur front license plate on

topekatc

iTrader: (1)

or come to kansas where you never have to have a front license plate so there aren't any drilled out holes

Jon

That's one thing I like about GA. Virgin bumper ftw.

llblutigerll

there is already a tread about this

Aroddalobster

iTrader: (1)

been around for a while, i did this about 4 yrs ago on my first bumper.

Alexisonfire

just went and bough these gonna use touch up paint that i have to paint them hopefully ill do it on sunday night or monday im gunna be away this weekend

jordankinship

lol, not bad. better than having a hole

dropzone

I just run an angled plate setup, got it at Autozone for $10 by Bell. I find having a plug sticking out is as bad or worse as the holes drilled in, which is why I put the plate on(after being hassled not running a front plate). It was either have the holes filled and get the bumper(or at least that section) repainted and relocate the plate or have the plate installed at the factory location. I just chose the latter.

speedy000

iTrader: (2)

i saw some one fill the hole with silicone then wipe off excess and use touch up paint. then bam its flush no "plug" look to it.