problem.... somtimes when the camcon is on my rpm goes up and down up and down rocking the car back nd forth. i checked all the wiring seems good. some times it does it somtimes it doesnt its weird...


and my cel comes right on when it is turned on after a reset of the ecu..

im thinking i have a bad ground since we connected it to a 3 inch peice of metal connected too the ecu.. what do you think?



And when it is working it gave me a lead of about a car and a half from 0-70 on my friends tc which used to be the same speed as me. AND im not even tuned

 

^alright keep talkin ur talk lol

 

ha dont be mad cuz you lost...

 

ok.. the greddy e-management and the comcam controll different things, so, you could run them both right?

 

i dont think so
just buy a v manage it does everything

 

well my car has stalled twice in idle since my camcon has been installed.. and my rpm rocks back and forth from time to time.. but my car is hauling ___... im not rlly sure whats wrong here.

 

get it tuned, than it will all b fine

 

lol, i'll whoop both of u guys.,

 

not ina car show AHHAHAHA..... any way tuned should help but my settings are at 0 until 2k rpm i was at idle...

 

Your settings should zero until after 2krpm.

If you turn off the unit, do you still get the idle problems?

 

lol johnny bring it on

 

when the camcon is off it back to stock...

the weird thing is i reset my scu drove around witht he camcon off no check engine light but as soon as i turn it on it pops straight up.

everything is zero until 2k right when i got to 2 k my cel cam on .

 

try 4K and above.

 

It's my understanding that it should not cause a check engine light if installed properly and tuned within acceptable ranges.

Verifying what code the ECU is throwing would help, but it is my guess that-

1) Something might not be wired or grounded correctly

2) The CAMCON might be attempting to adust the A/F ratios outside of a range acceptable to the ECU. I.E., too rich or too lean. This would throw a code.

3) Same as #2, but concerning timing advancements.

Any way of pulling the code and telling us what it is ? A code that goes off quickly indicates it is likely one of the above.

 

what good is a car when its parked collecting trophies ...going faster then the next guy > then any trophy

 

^lmao


hey andrew go to pep boys or autozone and tell them to use their code reader for ur car, they do it for free

 

turned my camcon off for 30 miles and cel dissapeared.. something is not hooked up right ..

 

well the power and the afr was not connected right.. its all fixed now and no cel.

 

damn whoever installed it right must be a pro

 

the same guy who meesed it up in the 1st place.. lol